Panasonic GT703, Руководство пользователя

Страница: 83 / 105

5.2 Error Codes and How to Handle Them
5-7
5.2 Error Codes and How to Handle Them
5.2.1 About Error Codes
When an error occurs in the GT series, an error code displays at the top right of the screen.
There are two types of error codes, GT703/GT704 series error codes and PLC error codes.
5.2.2 GT703/GT704 Series Error Codes
The following error codes are displayed when there is an error in the GT.
Code no. Error Cause and solution
**00FF Time up error
The connection between the GT and PLC may not be correct.
Check the wiring of the connection cable and check for
disconnection. Also, there may be a temporary error due to
noise, etc. Re-supply power to the PLC and GT.
**0100
Keyboard screen data parts
digit error
Check if the digit of the data parts on the keyboard screen has
been set correctly.
**0101 Alarm history error
When updating the alarm history display is stopped, alarm
history data displayed on the GT
’
s screen has been updated
within the memory. Once the stop of display update is cancelled,
new data is displayed.
**0102
True Type font file transfer
error
Screen data is not transferred correctly. Re-transfer data after
deleting all data.
**0103 Boot screen error
The boot screen file is not correct. Transfer the data after
deleting all data.
**0500 Tool setting error
The device that cannot be used is specified for the data. Check if
the used device is correct. (e.g. the word device is set in the bit
area.)
**1000 SD memory card not inserted
An SD memory card is not inserted into the slot properly. Check
the SD memory card slot.
**1001 SD memory card writing error
Data cannot be written into the SD memory card. Check whether
the SD memory card is not write-protected.
**1002 SD memory card memory full
Data cannot be written as the memory of the SD memory card
has been exhausted. Delete some data in the SD memory card
or prepare a new SD memory card.
**1003 SD memory card reading error
The data in the SD memory card cannot be read. Check whether
the saved data in the SD memory card is not damaged with a
PC.
**1004 SD memory card data error
The data loaded from a SD memory card does not match the GT
type. Read the data in the SD memory card with GTWIN, and
check whether it is not damaged.
**1005
SD memory card saved file
name error
The file name to be saved to the SD memory card from the GT is
not specified properly. Specify the file name properly.