• Weights and dimensions are approximate. • Specifications are subject to change without notice. • These products may be subject to export control regulations.
Printed in Japan
[P-454]
A Division of Panasonic Broadcast & Television Systems Company
A Unit of Matsushita Electric Corporation of America
Executive Office: 50 Meddowlands Pkwy 4D-4, Secaucus, New Jersey 07094 (201) 392-6674
PANASONIC CANADA INC.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905) 624-5010
PANASONIC SALES COMPANY
DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC.
San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina, P.R. 00630 (809) 750-4300
Medical & Industrial Video Company
DISTRIBUTED BY:
Pick-up Device
Interline Transfer type CCD with 768 (H) x 494 (V) pixels.
Image Size
1/2” (7.95 (H) x 6.45 (V) mm)
2 : 1 interlace 1-line interlace (Frame accumulation)
2 : 1 interlace 2-line interlace (Field accumulation)
Synchronization
Internal or External (Selectable Automatically)
Internal : Built-in sync generator
External : 4.0 V[p-p]/75 ohms Horizontal drive and Vertical drive pulses
for 2 : 1 interlace
External Reset
External signal (4.0 V[p-p]/75 ohms, negative) supplied to EXT VD IN
connector can be used as reset signal
Horizontal Resolution
570 lines at center
Minimum Illumination
1.0 lx (0.1 foot-candles),
(F1.4, Manual Gain Max (+6 dB), 2 : 1 interlace, without shutter)
Signal to Noise Ratio
56 dB Typical (Manual Gain Off (0 dB), 2 : 1 interlace without shutter)
Gamma
1.0
Gain Selection
0 - 6 dB, (Adjustable by Manual Gain Control on rear panel)
Electronic Shutter
10-step (1/100 s to 1/96 000 s) at normal
7-step (1/2 000 s to 1/96 000 s) at Shutter Trigger Mode (Latch Off)
4-step (1/2 000 s to1/30 000 s) at Shutter Trigger Mode (Latch On)
Lens Mount
C-Mount
Vibration Resistance
10 G (10 Hz - 150 Hz) (2 hours each for three axes)
Shock Resistance
80 G (IEC 68) *IEC=International Electronical Technical Commission
Power Source
DC + 12 V, 170 mA
Ambient Temperature
-10˚C - +50˚C (14˚F - 122˚F)
Dimensions
29 (W) x 29 (H) x 65 (D) mm [1-1/8" (W) x 1-1/8" (H) x 2-9/16" (D)]
Weight
86
g
(0.19 lbs.) (Camera Only)
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
1-1/8" (29)
1-1/8" (29)
3-1/16" (77.8)
Lens optional
2-9/16" (65)
5/16" (8)
7/16" (11.5)
1-3/4" (44.5)
6-M3
13/16" (20)
SPECIFICATIONS
APPEARANCE
OPTIONAL ACCESSORIES
Camera Cable
GP-CA34
Camera Cable
GP-CA33
Unit: inches (mm)
Video Monitor
Camera
GP-CA34
Coaxial Cable
Coaxial Cable
HD/C SYNC IN
12V DC
Power Supply
VD/V reset/V cont IN
OUT
IN
75
Ω
Hi-Z
VIDEO
622
SYSTEM CONNECTIONS
Internal
synchronization
SW2-1:off SW2-4:off
SW2-2:off SW2-5:on
SW2-3:off SW2-6:on
HD/VD External
synchronization
SW2-1:off SW2-4:off
SW2-2:off SW2-5:
SW2-3:off SW2-6:
HD/Vreset External
synchronization
SW2-1:on SW2-4:off
SW2-2:off SW2-5:
SW2-3: SW2-6:
HD/Vcont External
synchronization
SW2-1:off SW2-4:on
SW2-2:on SW2-5:
SW2-3: SW2-6:off
HD/VD Input impedance
75
Ω
off
SW2-5:off SW2-6:off
HD/VD Input impedance
75
Ω
off
SW2-5:off SW2-6:off
HD Input impedance
75
Ω
off
SW2-5:off
HD/VD Input impedance
75
Ω
on
SW2-5:on SW2-6:on
HD/VD Input impedance
75
Ω
on
SW2-5:on SW2-6:on
HD Input impedance
75
Ω
on
SW2-5:on
Vrest
Latch off Latch on
SW2-3:off SW2-3:on
Vrest
Latch off only
SW2-3:off only
Internal
synchronization
External
synchronization
start
Synchronization
Field / Frame integration select
SW1-1: on Field integration
SW1-1: off Frame integration
or
or
or
FUNCTION SWITCH SPECIFICATION
Right Side View
Left Side View
Rear View
123456
SW2
SW1
Rear View
VR3
BNC
VR5 12pin Conector
SW2
1: Synchronization 1
2: Synchronization 2
3: Vrst Latch OFF/ON
4: Vcont DC OFF/ON
5: HD 75
Ω
OFF/ON
6: VD 75
Ω
OFF/ON
SW1
1: Field / Frame
2: Electronic shutter D0
3: Electronic shutter D1
4: Electronic shutter D2
5: Electronic shutter D3
6: Not used
VR3: Pedestal Control
VR5: Manual Gain Control
BNC Conector: Video out 2
Camera Connector (12-pin)
HR10A10R12PB
Pin No. Description
1
Ground
2
+12V IN
3
Ground for Video Out
4
Video Out
5
Ground for HD
6
HD/C SYNC IN
7
VD/V reset/V cont IN
8
Ground
9
No connection
10
No connection
11
No connection
12
Ground for VD
Actual size
Actual size
