background image

2

 indicates safety information.

CAUTION

RISK OF ELECTRIC SHOCK

 DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The  lightning  flash  with  arrowhead  symbol, 
within  an  equilateral  triangle,  is  intended  to 
alert  the  user  to  the  presence  of  uninsulated 
“dangerous  voltage”  within  the  product’s 
enclosure  that  may  be  of  sufficient  magnitude 
to constitute a risk of electric shock to persons.

The  exclamation  point  within  an  equilateral 
triangle  is  intended  to  alert  the  user  to  the  
presence  of  important  operating  and 
maintenance  (service)  instructions  in  the 
literature accompanying the appliance.

This  class  A  digital  apparatus  complies  with 
Canadian ICES-003.

For CANADA

WARNING:

•  TO  REDUCE THE  RISK  OF  FIRE  OR  ELECTRIC 

SHOCK,  DO  NOT  EXPOSE THIS  APPARATUS TO 
RAIN OR MOISTURE.

•  THE  APPARATUS  SHALL  NOT  BE  EXPOSED TO  

DRIPPING  OR  SPLASHING  AND  THAT  NO 
OBJECTS  FILLED  WITH  LIQUIDS,  SUCH  AS  
VA S E S ,  S H A L L   B E   P L AC E D   O N   T H E 
APPARATUS.

FCC Note:
This equipment has been tested and found to comply 
with the limits for a class A digital device, pursuant to 
Part 15 of the FCC Rules.  These limits are designed 
to  provide  reasonable  protection  against  harmful 
interference  when  the  equipment  is  operated  in  a 
commercial  environment.   This  equipment  generates, 
uses,  and  can  radiate  radio  frequency  energy,  and  if  
not  installed  and  used  in  accordance  with  the 
instruction  manual,  may  cause  harmful  interference 
to radio communications.  Operation of this equipment 
in  a  residential  area  is  likely  to  cause  harmful   
interference in which case the user will be required to 
correct the interference at his own expense.

FCC Caution:
To  assure  continued  compliance,  (example  ‑use  only 
shielded  interface  cables  when  connecting  to  other 
devices).  Any  changes  or  modifications  not  expressly 
approved  by  the  party  responsible  for  compliance 
could  void  the  user's  authority  to  operate  this 
equipment.

CAUTION:

In  order  to  maintain  adequate  ventilation,  do  not 
install  or  place  this  unit  in  a  bookcase,  built-in 
cabinet  or  any  other  confined  space.  To  prevent 
risk  of  electric  shock  or  fire  hazard  due  to 
overheating,  ensure  that  curtains  and  any  other 
materials do not obstruct the ventilation.

Safety precautions

CAUTION:
Before  attempting  to  connect  or  operate  this  product, 
please read the label on the bottom.

The model number and serial number of this product 
may be found on the surface of the unit.
You should note the model number and serial number 
of  this  unit  in  the  space  provided  and  retain  this 
book  as  a  permanent  record  of  your  purchase  to  aid 
identification in the event of theft.
Model No.                                                                   
Serial No.                                                                   

For U.S.A.

For use only with power supply Panasonic, PNLV6506.

Содержание GP-VD130

























Отзывы: