25
v
Move the cursor to "SYNC" on the top screen of the
SETUP menu.
b
Press the [SEL] button after making sure that "EXT" is
displayed.
→
The "SYNC" screen appears.
n
Connect the G or Y signal from the RGB/YPbPr output
connector and the video synchronizing input signal to
an oscilloscope, and observe the horizontal synchro-
nization component.
m
Adjust the horizontal phase with use of the [
e
] or [
f
]
button.
12. Configure the settings relating to
the electronic zoom [ELECTRIC
ZOOM]
Select "ON" (default) or "OFF" to determine whether or not
to use the electronic zoom.
To prevent the electronic zoom from being active by mis-
take, select "OFF".
When "ON" is selected, assignment of the zoom function
to the [
e
] and [
f
] buttons allows users to scale up (up
to 2.5 times) a subject with use of the buttons.
Note:
• Calling up the SETUP menu cancels scale up and
down.
• When "ELECTRIC ZOOM" is set to "OFF", "ZOOM
OFF" appears in the SEL menu, and the zoom func-
tion is not adjustable.
13. Image freezing [FREEZE]
Selection of "ON" (default) or "OFF" determines whether or
not to enable the freeze function.
When "ON" is selected, pressing the [FREEZE
]
button on the front face of the CCU allows users to dis-
play the video currently displayed as a static image.
(
☞
page 9)
14. Setting of vertical flip function
[FLIP ENABLE]
Selection of "ON" or "OFF" determines whether or not to
enable the vertical flip function with use of the [
g
] or [
h
]
button.
OFF (default):
Locks the normal display.
OFF (FLIP):
Locks the vertically flipped display.
ON (FLIP):
Selects the vertically flipped display. The ver-
tical flip function is still available.
MENU
ON:
Selects the normal display. The vertical flip function
is still available.
Note:
• This function can be used in conjuction with the
freeze function and zoom function.
• When "ON" is selected, "ON" can be changed to
"OFF" or "OFF(FLIP)" also in the SEL menu.
15. Setting of horizontal flip function
[MIRROR ENABLE]
Selection of "ON" or "OFF" determines whether or not to
enable the horizontal flip function with use of the [
g
] or
[
h
] button.
OFF (default):
Locks the normal display.
OFF (MIRROR):
Locks the horizontally flipped display.
ON (MIRROR):
Selects the horizontally flipped display.
The horizontal flip function is still available.
ON:
Selects the normal display. The horizontal flip func-
tion is still available.
Note:
• This function can be used in conjunction with the
freeze function and zoom function.
• When "ON" is selected, "ON" can be changed to
"OFF" or "OFF(MIRROR)" also in the SEL menu.
16. Display setting of vertical and hor-
izontal flip function [STATUS DIS-
PLAY]
Selection of "ON" or "OFF" determines whether or not to
display an arrow ("
↓
": vertical flip, "
→
": horizontal flip, and
"
↓ →
": vertical and horizontal flip) with use of the [
g
] or
[
h
] button.
Default restoring
• To restore the setting contents with level indicator in
the SETUP menu or SEL menu to each default, hold
down the [
e
] and [
f
] buttons simultaneously for 2
seconds or more.
• To restore all the setting contents in the SETUP menu
and SEL menu to default, move the cursor to "END" in
the bottom line and hold down the [FREEZE
]
and [
h
] buttons simultaneously for 2 seconds or
more.
MENU
