-11-
• All Reset Operation
All Reset allows you to reset all setup menu items
to the factory settings if you are unsure about the
correct settings. Proceed as follows:
1. Repeat the above procedures to display the
SETUP menu.
2. Move the cursor to END at the bottom line.
3. Press both
A
and
B
for a few seconds. The
SETUP menu disappears from the monitor
screen and the auto warning indicator lights in
red.
The All Reset operation resets all adjustments and
parameters to the factory default settings. The auto
warning indicator goes off if AWC or ABC is per-
formed.
** SET UP **
CAMERA ID *OFF
FLD/FRM FLD
ELC *OFF
SHUTTER OFF
GAIN AUTO
SYNC *INT
BLACK BAL ABC
SCENE FILE *SCENE1
END
** SET UP **
CAMERA ID *OFF
FLD/FRM FLD
ELC *OFF
SHUTTER OFF
GAIN AUTO
SYNC INT
BLACK BAL ABC
SCENE FILE *SCENE1
END
• Editing the SETUP menu
To edit the SETUP menu (change settings), press
the ITEM button to move the cursor to an item, and
press
A
and
B
to change its parameter. After
completing all the settings, move the cursor to END
at the bottom line, and press the PAGE button. The
new values are stored in the EEPROM (Electric
Erasable and Programmable Read Only memory).
These values remain valid until new values are
stored, even if the power of the camera control unit
is off.
• Opening the SETUP menu
Press the PAGE button for a few seconds.
