-8-
Cautions :
1. Keep the DC POWER ON/OFF switch in the OFF
position until all connections have been properly
made.
2. Connect the camera head and camera control unit.
Internal Sync Operation
1. Connect the camera cable between the camera
head and the camera control unit.
2. Connect the coaxial cable with BNC connectors
between the video output connector of the camera
control unit and the video monitor or VTR.
Gen-lock Operation
1. Connect the camera cable between the camera
head and the camera control unit.
2. Connect the coaxial cable with BNC connectors
between the video output connector of the camera
control unit and the video input connector of
Special Effects Generator (SEG), and between the
VBS/HD input connector of the camera control unit.
3. Connect the power cable between the 12V DC
input terminals and the 12 V DC power supply unit
(obtained locally).
Caution :
Connect to 12 V DC (11.5 V - 16 V) class 2
power supply only.
3. Connect the power cable between the 12V DC
input terminals and the 12V DC power supply unit
(obtained locally).
• The maximum cable length between camera con-
trol unit and power supply unit is calculated as fol-
lows:
11.5 V DC < V
A
- (R x 0.42 x L) < 16 V DC
L : Cable length (meters)
R : Resistance of copper wire (
Ω
/meter)
V
A
: DC output voltage of power supply unit
L standard = V
A
- 12 / 0.42 x R (meters)
L minimum = V
A
- 16 / 0.42 x R (meters)
L maximum = V
A
- 11.5 / 0.42 x R (meters)
Caution :
Connect to 12 V DC (11.5 V - 16 V) class 2
power supply only.
CONNECTIONS
IN
OUT
VIDEO
75
Ω
Hi-Z
Video
Monitor
IN
OUT
VIDEO
75
Ω
Hi-Z
VTR or
Video Monitor
Coaxial
Cable
VBS/HD
VD
OFF
ON
75
Ω
S-VIDEO
OUT
1
2
VIDEO
RS-232C
RGB/SYNC
DC 12V IN
CCU
VBS/HD
VD
OFF
ON
75
Ω
S-VIDEO
OUT
1
2
VIDEO
RS-232C
RGB/SYNC
DC 12V IN
CCU
VBS/HD
VD
OFF
ON
75
Ω
S-VIDEO
OUT
1
2
VIDEO
RS-232C
RGB/SYNC
DC 12V IN
CCU
VIDEO Out
75
Ω
set to ON
VBS/HD In
VIDEO Out
75
Ω
set to ON
VBS/HD In
VIDEO In
Black Burst
Out
Special Effects Generator
(SEG)
