Panasonic GP-MH310 series, Техническое руководство

Страница: 13 / 43

Communications Protocol
Model: GP-HB310
Message
Area Mask OFF A0 10 00 0p 0q CS FF p: aspect
（
0: 16:9, 1: 4:3
）
q: Mask number 1-15 (All OFF when 0)
Area Mask ON A0 10 01 0p 0q CS FF p: aspect
（
0: 16:9, 1: 4:3
）
q: Mask number 1-15 (All ON when 0) * Up to 8 masks can be
displayed on a single-screen.
Privacy Mask Move A0 10 02 00 0p CS FF p: Privacy mask angle link (0: OFF, 1: ON) * When set to OFF only Mask numbers 1 – 8 can be used.
Area Mask Position Clr A0 10 05 0p 0q CS FF p: aspect
（
0: 16:9, 1: 4:3
）
q: Mask number 1-15 (ALL CLEAR when 0)
*Only the "Position setting" is cleared. To make the mask display off, set the Area mask to OFF.
Area Mask Position Set A0 10 09 0p 0q 0r 0s 0t
0u
 0v 0w 0x 0y 0z 0a 0b
0c
 0d e f g CS FF
Sets the positioning of the mask. p: aspect （ 0: 16:9, 1: 4:3 ）
d: Mask transparency (0-15) e:Y(0-127) f:Pb(0-127) g:Pr(0-
127)
. Refer to "Function Descriptions [11]Privacy Mask Setting"
Area Mask Position Center
Set A0 10 0A 0p 0q 0r 0s 0t
0u
 0v 0w 0x y z a CS
FF
Sets the mask to the center of the optical axis. p: aspect
（
0: 16:9, 1: 4:3
）
q: mask number (1-15) x: Mask transparency (0-15) y:Y(0-127) z:Pb(0-127) a:Pr(0-127)
Area Mask Position Full
Screen Set
A0 10 0B 0p 0q 0r s t u

CS FF
Mask is set the full screen being displayed p: aspect （ 0: 16:9, 1: 4:3 ）
q: mask number (1-15) r: Mask transparency (0-15) s:Y(0-127) t:Pb(0-127) u:Pr(0-127)
Privacy
Masking
Area Mask Degree Set A0 10 11 0p 0q 0r 0s 0t
fu
 0v 0w CS FF
p: aspect
(
0: 16:9, 1: 4:3
)
q: Mask No (1-15), rst: Pan Degree uvw: Tilt Degree
* Degree increased x10 and the value input is converted to a hexadecimal
number. f: Tilt angle sign bit
Pan/Tilt
Degree
Pan/Tilt Degree A0 11 10 0p 0q 0r 0s xt
0u
 0v 0w CS FF
Current positioning information settings when installing dome camera * The degree is magnified x100,
inputs the value changed to a hexadecimal number. pqrs: Pan Degree, tuvw:Tilt Degree, x: Tilt angle
sign bit
(Note 5)
OFF A0 12 00 CS FF STILL
ON A0 12 01 CS FF Sets the current image to still.
Zoom Ratio A0 14 00 0p CS FF p: Display zoom ratio on OSD(1: ON / 0: OFF) OSD
Zoom Ratio Position A0 14 0A 0p CS FF p: Zoom Ratio Display Position(1: Upper-Left, 2: Lower-Left, 3: Upper-Right[default], 4:Lower-Right)
OFF A0 15 00 0p CS FF
ON A0 15 01 0p CS FF
Camera ID display (1:ON / 0:OFF [Initial value] )
ID Set (ASCII Code) A0 15 09 p q r s t u

v w x y z a b
c
 d e CS FF
Camera ID settings (Note 6)
Camera ID
ID Position A0 15 0A 0p CS FF p: Camera ID Display Position(1: Upper-Left[default], 2: Lower-Left, 3: Upper-Right, 4:Lower-Right)
19200 bps A0 1A 00 CS FF
9600 bps A0 1A 01 CS FF
4800 bps A0 1A 02 CS FF
2400 bps A0 1A 03 CS FF
Baudrate
38400 bps A0 1A 04 CS FF
UART communication speed settings
Enables after camera restart [Initial value : 38400bps ]
D/N COLOR A0 28 00 CS FF Color Mode
D/N BLACK/WHITE A0 28 01 CS FF Black and White Mode
D/N AUTO A0 28 02 CS FF Color/Black and White Auto Switch Mode (Note 3)
D/N LEVEL SET A0 28 05 0p CS FF p: Color/Black and White Switch Level Settings (0: LOW, 1: MID [Initial value], 2: HIGH, 3:
ADJ) Switch level LOW: Dark – High: Bright ADJ: Manual setting
D/N ADJ DIRECT (C->B/W) A0 28 06 0p CS FF Switch Level LOW: Dark-HIGH: Bright
ADJ: Manual Settings
p: Color Black and White Switch Level Manual Settings 0-6
Larger value switches darker sections [Initial value: 3]
D/N ADJ DIRECT (B/W->C) A0 28 07 0p CS FF p: Black and White Color Switch Level Manual Settings 0-6
Larger value switches darker sections [Initial value: 3]
D/N FOCUS SET (AUTO) A0 28 08 0p CS FF p: Focus mode settings during D/N AUTO black and white, 0: Near infrared wavelength compensation
(MODE1), 1: Corresponds to optical wavelengths (MODE2)
D/N FOCUS SET (B/W) A0 28 09 0p CS FF p: Focus mode settings during D/N BLACK/WHITE, 0: Near infrared wavelength compensation
(MODE1), 1: Corresponds to optical wavelengths (MODE2)
DAY/
NIGHT
D/N Filter Slide Time A0 28 16 p CS FF p: Changes the D/N filter slide time. (5 – 20 seconds) [Initial value: 10 seconds]
Flickerless Flickerless OFF/ON A0 29 0p CS FF p: Flicker reduction (0:OFF 1:ON) [Initial value: OFF]
Vivid Color
Effect
Vivid Color Effect A0 30 0p CS FF p: Vivid Color Effect (0:OFF 1:ON) [Initial value: OFF]
AutoScene AutoScene Mode OFF/ON A0 31 01 0p CS FF p: AutoScene Mode (0:OFF 1:ON) [Initial value: OFF]
Stabilizer Stabilizer OFF/ON A0 33 00 0p CS FF p: Stabilizer (Stabilizing function) ON/OFF (0: OFF/1: ON) [Initial value : OFF]
Auto Pursuit OFF/ON A0 34 00 0p CS FF p: Auto Pursuit ON/OFF (0: OFF/1: ON) [Initial value: OFF] Auto
Pursuit
Auto Pursuit Sensitivity A0 34 01 0p CS FF p: Sets the sensitivity to brightness variation when motion is detected
1-F (High sensitivity – Low sensitivity) [Initial value: 7]
Face
Detection
Face Detect OFF/ON A0 35 01 0p 0q CS FF p: Face Detection ( 0: OFF / 1: ON ) [Initial value: OFF]
q: with frame Display ( 0: OFF / 1: ON ) [Initial value: OFF]
UVC Mode A0 3C 00 0p q r s CS FF p: UVC Mode(USB Video Class) (0: OFF / 1: Continuous Mode / 2: One Shot )
q: Resolution
[16:9] 0:1920x1080 1:1280x720 2:1024x576 3:640x360
[4:3] 0:2288x1712 1:1600x1200 2:1280x960 3:1024x768 4:800x600 5:640x480
6:320x240 r: Quality
0:basic 1:Normal 2:Enhanced 3:Fine
4:SuperFine s: Framerate
[NTSC] 0:0.1ips 1: 0.2ips 2: 0.5ips 3: 1ips 4: 3ips 5: 5ips 6: 10ips 7: 15ips 8: 30ips
[PAL] 0:0.1ips 1: 0.2ips 2: 0.5ips 3: 1sip 4: 2.5ips 5: 5ips 6: 7.5ips 7: 12.5ips 8: 25ips
Alarm Setting A0 3C 03 0p 0q CS FF p: Alarm IN polarity. ( 0: NO [Initial value] / 1: NC )
q: Alarm OUT Polarity ( 0: NO [Initial value] / 1: NC )
UVC
Strobe Delay Time A0 3C 04 p CS FF p: Strobe Delay Time ( 0 - 50ms ) [Initial value : 25]
CS: Checksum
FF: Terminator
− 12 −