Panasonic GP-MH310 series, Техническое руководство

Страница: 12 / 43

Communications Protocol
Model: GP-HB310
Message
Motion Detector OFF A0 08 00 CS FF
Motion Detector ON A0 08 01 CS FF
Motion sensor ON/OFF [Initial value: OFF] (Note 3)
Motion Size Preset A0 08 05 CS FF Returns detected motion size settings to factory defaults [Initial value: V-Size: 1, H-Size: 1]
Motion Size Direct A0 08 06 0p 0q CS FF Detected motion size settings p: V-Size (1-16) q: H-Size (1-
16) [Initial value: V-Size: 1, H-Size: 1]
Masking OFF A0 08 0A CS FF
Masking ON A0 08 0B CS FF
Mask area settings for motion detection ON/OFF
Mask Area Preset A0 08 0F CS FF Returns mask area for motion detection to factory defaults
Mask Area Direct A0 08 13 0p 0q 0r 0s 0t
0u
 CS FF
Mask area settings for motion detection
(Note 1)
Sensitivity Move + A0 08 15 CS FF
Sensitivity Move - A0 08 16 CS FF
Motion detection sensitivity settings [Initial value: 5]
* Smaller values increase the sensitivity to small movements.
Sensitivity Move Preset A0 08 19 CS FF Returns motion detection sensitivity settings to factory defaults [Initial value: 5]
Sensitivity Move Direct A0 08 1D 0p CS FF p: Direct motion detection sensitivity settings 1-10 [Initial value: 5]
Sensitivity Y-Level + A0 08 1F CS FF
Sensitivity Y-Level - A0 08 20 CS FF
Minimum brightness settings for motion detection [Initial value: 5]
* Smaller values increase the sensitivity to movements even on dark screens.
Sensitivity Y-Level Preset A0 08 23 CS FF Returns minimum brightness settings for motion detection to factory default [Initial value: 5]
Sensitivity Y-Level Direct A0 08 27 0p CS FF p: Direct minimum brightness settings for motion detection 1-10 [Initial value: 5]
Sensitivity Y- A0 08 29 CS FF
Sensitivity Y-Differ - A0 08 2A CS FF
Brightness variation settings for undetected motion [Initial value: 5]
* Smaller values increase the sensitivity to movements even with large brightness variation.
Sensitivity Y-Differ Preset A0 08 2D CS FF Returns brightness variation settings for undetected motion to factory defaults [Initial value: 5]
Sensitivity Y-Differ Direct A0 08 31 0p CS FF p: Direct brightness variation settings for undetected motion 1-10 [Initial value: 5]
Sensitivity Du A0 08 33 CS FF
Sensitivity Duration - A0 08 34 CS FF
Continuous movement time for motion detection [Initial value: 1]
* Smaller values increase the sensitivity to fast moving subjects.
Sensitivity Duration Preset A0 08 37 CS FF Returns continuous movement time for motion detection to factory defaults [Initial value: 1]
Sensitivity Duration Direct A0 08 3B p CS FF p: Direct continuous movement time for motion detection 1-60 [Initial value: 1]
Motion Zoom A0 08 3D 0p CS FF p: Zoom magnification during motion detection [Initial value: 0]
(0: OFF, 1: x1.4, 2: x2, 3: x2.8, 4: x4, 5: x5.6, 6: x 1/1.4, 7: x 1/2, 8: x 1/2.8, 9: x 1/4, 10: x 1/5.6)
Motion Interval A0 08 42 0p CS FF p: Interval time until the start of next detection during motion detection [Initial value: 0]
(0: 5sec, 1: 10sec, 2: 15sec, 3: 20sec, 4: 30sec, 5: 45sec, 6: 1min, 7: 2min, 8: 3min, 9: 4min, 10:
5min)
Motion
Detector
Motion by Face Detect A0 08 44 0p CS FF p: Motion detect with Face Detect (0:OFF, 1:ON) [Initial value: OFF]
COLOR MAX Gain A0 0A 00 0p CS FF p: AGC MAX Gain settings during COLOR (0: LOW, 1: NORM[Initial value], 2: MID, 3: HIGH, 4:LOW1,
5:LOW2) [ Add LOW1/LOW2 from Firm Ver.1.01-02]
B/W MAX Gain A0 0A 01 0p CS FF p: AGC MAX Gain settings during B/W (0: LOW, 1: NORM[Initial value], 2: MID, 3: HIGH, 4:LOW1,
5:LOW2) [ Add LOW1/LOW2 from Firm Ver.1.01-02]
AUTO MAX Gain A0 0A 02 0p CS FF p: AGC MAX Gain settings during AUTO (0:LOW, 1: NORM[Initial value], 2: MID, 3: HIGH, 4:LOW1,
5:LOW2) [ Add LOW/LOW1/LOW2 from Firm Ver.1.01-02]
AGC ON/OFF A0 0A 03 0p CS FF p: AGC ON/OFF switch (Cannot be set to OFF when D/N AUTO or when SENSE UP setting is
enabled) (0:OFF, 1:ON[Initial value]) (Note 3)
COLOR AGC_OFF Gain + A0 0A 0B CS FF
COLOR AGC_OFF Gain - A0 0A 0C CS FF
Gain settings when COLOR and AGC are OFF [Initial value: 0dB]
B/W AGC_OFF Gain + A0 0A 0D CS FF
B/W AGC_OFF Gain - A0 0A 0E CS FF
Gain settings when B/W and AGC are OFF [Initial value: 0dB]
Gain Preset A0 0A 0F CS FF Returns gain settings when AGC is OFF to factory defaults
(D/N camera is both COLOR and B/W) [Initial value: 0dB]
Gain Direct (COLOR) A0 0A 12 0p CS FF p: Gain settings when COLOR and AGC are OFF
(0: 0dB[Initial value], 1: 3dB, 2: 6dB, 3: 9dB, 4: 12dB, 5: 15dB, 6: 18dB, 7: 21dB, 8: 24dB, 9: 27dB,
10: 30dB, 11: 33dB, 12: 36dB, 13: 39dB, 14:42dB )
Gain Direct (B/W) A0 0A 13 0p CS FF p: Gain settings when B/W and AGC are OFF
(0: 0dB[Initial value], 1: 3dB, 2: 6dB, 3: 9dB, 4: 12dB, 5: 15dB, 6: 18dB, 7: 21dB, 8: 24dB, 9: 27dB,
10: 30dB, 11: 33dB, 12: 36dB, 13: 39dB, 14:42dB )
AGC
Digital gain A0 0A 20 0p CS FF p: Digital gain ON/OFF (0:OFF, 1:ON) [Initial value: ON]
OFF A0 0B 00 CS FF
ON A0 0B 01 CS FF
[Initial value: ON]
Aperture V + A0 0B 0B CS FF
Aperture V - A0 0B 0C CS FF
Vertical contour compensation settings
Aperture V Preset A0 0B 0F CS FF Returns vertical contour compensation settings to factory defaults ( Initial value: 8 )
Aperture V Direct A0 0B 13 0p CS FF p: Vertical contour compensation settings 1-15 [Initial value: 8]
Aperture H + A0 0B 15 CS FF
Aperture H - A0 0B 16 CS FF
Horizontal contour compensation settings [Initial value: 8]
Aperture H Preset A0 0B 19 CS FF Returns horizontal contour compensation settings to factory defaults [Initial value: 8]
Aperture
Aperture H Direct A0 0B 1D 0p CS FF p: Horizontal contour compensation settings 1-15 [Initial value: 8]
OFF A0 0C 00 CS FF Gamma OFF (1)
ON A0 0C 01 CS FF Gamma ON (0.45)
SMART1 A0 0C 02 CS FF Gamma SMART1 (Increases the contrast of dark sections)
Gamma
SMART2 A0 0C 03 CS FF Gamma SMART2 (Further increases the contrast of dark sections)
OFF A0 0D 00 CS FF Canceling Inversions [Initial value : OFF ]
H-Mirror A0 0D 01 CS FF Horizontal inversion (Cancels vertical inversion)
V-Mirror A0 0D 02 CS FF Vertical inversion (Cancels horizontal inversion)
Mirror
HV-Mirror A0 0D 03 CS FF Vertical and horizontal inversions
OFF A0 0F 00 CS FF 3D DNR
ON A0 0F 01 CS FF
3D DNR (1: ON / 0: OFF) [Initial value ： ON]
CS: Checksum
FF: Terminator
− 11 −