-11-
PREVENTION OF BLOOMING AND
SMEAR
When the camera is aimed towards spotlights or other
bright lights or light reflecting objects, smear or bloom-
ing may appear. Therefore the camera should be oper-
ated carefully in the vicinity of extremely bright objects
to avoid smear or blooming.
If the camera is aimed at the sun or very bright light,
such as laser beam, for a long period of time, the CCD
image sensor may be burned in and blemishes (white
or black dots) appears on the picture.
Bright object
Smear
SPECIFICATIONS
Pick-up Device :
752(H) x 582(V) pixels, 1/2” Interline Transfer CCD
Scanning System :
2 : 1 Interlace
Scanning :
625 Lines / 50 Fields / 25 Frames
Horizontal :
15,625 kHz
Vertical :
50 Hz
Horizontal Resolution :
480 lines
Video Output :
1.0 Vp-p PAL composite, 75 ohms/BNC connector
Signal to Noise Ratio :
50 dB (AGC OFF)
Electronic Light Control :
Equivalent to continuous variable shutter speed between 1/50 sec. and
1/15,600 sec.
Minimum Illumination :
3 lux (0.3 footcandle) at F 1.4 (AGC ON)
White Balance :
AWC / ATW selectable
Back-Light Compensation :
Selectable On/Off
Sync System :
Internal
Aperture :
Selectable Soft/Sharp
AGC :
Selectable On/Off
Ambient Operating Temperature :
−10° C - +50° C (14° F - +122° F)
Power Source :
10.8 - 16 V DC, 300mA
Dimensions (excluding lens) :
67(W) X 55(H) X 123(D) mm
2-5/8”(W) X 2-3/16”(H) X 4-13/16”(D)
Weight (excluding lens) :
460g (1.0 lbs.)
Weights and dimensions indicated are approximate.
Specifications are subject to change without notice.
-12-
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com