21
1. Camera title setting [CAMERA ID]
This item specifies the camera title. The camera title that indicates the camera location and other
information about the camera is created with alphanumerics and symbols and displayed on the
screen. The camera title is named with up to 16 characters. Follow the procedure below to specify
the camera title.
Top screen of SETUP menu
“CAMERA ID” screen
Display positioning screen
** SET UP ** P1
CAMERA ID *OFF
ELC *OFF
SHUTTER OFF
GAIN OFF
SENS UP OFF
OUTPUT SEL RGB
HDMI OUTPUT YPbPr(422)
SD ASPECT SIDE CUT
END
Editing area
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789
().,'":;&#!?=
+-*/%$ÄÜÖÆÑÅ
←
→
SPACE
*POSI RET END RESET
................
FLOOR 1
Step 1
Set “CAMERA ID” to “ON” and press the [SEL]
button.
The “CAMERA ID” screen appears.
→
Note:
Even when “CAMERA ID” is set to “OFF”,
•
pressing the [SEL] button allows the title
creation screen to appear.
Important:
When “CAMERA ID” is set to “OFF”, the
•
camera title does not appear even after
setting the camera title.
Step 2
Move the cursor to the target character by
pressing the [
g
], [
h
], [
e
] and [
f
] buttons,
and press the [SEL] button.
The entered characters are displayed in
→
the editing area.
<Character entry>
To revise a character, move the cursor to
•
“
←
” or “
→
” and press the [SEL] button.
Move the cursor to the character to be
revised in the entry range and reenter a
correct character.
To enter a blank, move the cursor to
•
“SPACE” and press the [SEL] button.
To delete all the entered characters, move
•
the cursor to “RESET” and press the [SEL]
button.
