Page 10 of 17
Model
Name
Model
No.
GA-M+
PN260496-TH
Product Specification
401-260496-TH-SP05
Date issued
Date revised
Jun. 29, 2021
Apr. 1,2022
Panasonic Electric Works Networks Co., Ltd.
7-1. Spanning Tree
IEEE 802.1D Spanning Tree Protocol, Rapid Spanning Tree Protocol
IEEE 802.1Q Multiple Spanning Tree Protocol
BPDU guard
IEEE802.1Q
Private VLAN
MAC-based VLAN
Subnet based VLAN
Protocol-based VLAN
Number of VLAN registrations: 4,094 (including default)
Asymmetric VLAN
Voice VLAN (LLDP-MED)
Dynamic VLAN
Guest VLAN
Internet mansion function
7-2. VLAN
7-3. Link aggregation
IEEE802.3ad Link Aggregation function (LACP/Manual)
Up to 3 groups can be created (up to 6 ports per group).
7-4. SPAN,RSPAN
Subject port traffic can be copied and transmitted to designated ports
(multiple subject ports can be designated)
Remote switching packets can be monitored via RSPAN.
7-5. Port grouping
Members of the port group can communicate only among member ports in
the same group. (Number of group registrations: 256)
7-6. QoS
IEEE802.1p 8 levels of Priority Queue supported
Scheduling Method:
Strict Priority Queuing (SPQ:Strict priority queuing )
Weighted Round Robin (WRR:Weighted round robin scheduling )
Weighted Deficit Round Robin (WDRR: Weighted Deficit Round Robin scheduling)
7-7. Authentication Function
IEEE802.1X Port-based authentication
Mac-based authentication using IEEE 802.1X
Dynamic VLAN function using IEEE 802.1X
Guest VLAN using IEEE 802.1X
(EAP-MD5/TLS/PEAP Authentication method)
IEEE802.1X supplicant
Force Authorized MAC Address Configuration
EAP Packet Forwarding function
(Enable/disable EAP transmission can be specified for each port.)
MAC authentication
WEB authentication
Triple authentication (*1)
Step authentication (*2)
*1 IEEE802.1X MAC-based/MAC/WEB authentication can be simultaneously
*2 2 authentications can be combined in phases
MAC-WEB authentication
MAC-802.1X authentication
802.1X-WEB authentication
7. Layer 2 Switching Functions
7-8. PoE power supply function
IEEE802.3bt/at/af power supply function.
Up to 240 W of power can be supplied to ports 1 to 4 in total.
(Maximum power supplied to a port: 90 W (factory default))
(Maximum power supplied to a port: 95 W (*3)(*4))
Supply method:
IEEE802.3at/af:Alternative A(Cable signal lines 1, 2, 3, and 6 are used.)
IEEE802.3bt:
Alternative A, B(Cable signal lines 1 to 8 are used.)
*3 This is enabled when the limit of power supply per port is set to 95W.
Power supply over 90W is available for only the Panasonic’s PDs
corresponding to PoE++.
*4 AWG24 and 65 Celsius degree or higher rated temperature cables are
recommended.