Features Summary
89
Advanced features
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
MODE=ON
[
±
]
ON (default):
The unit will print the journal
report automatically after every 30 new fax
communications (page 56).
OFF:
The unit will not print the journal report, but
keep records of the last 30 fax communications.
Code #23: Sending documents overseas
OVERSEAS MODE
MODE=ERROR
[
±
]
If you have difficulty sending an overseas fax,
activate this feature before starting transmission.
This feature makes sending documents easier
as the transmission speed is slowed down.
L
This feature is not available for broadcast
transmission.
L
The calling charge may be higher.
NEXT FAX:
This setting is effective only for the
next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
ERROR (default):
When the previous fax
transmission fails and you wish to redial the
same number.
OFF:
Deactivates this feature.
Code #25: Sending a fax at a specific time
DELAYED SEND
MODE=OFF
[
±
]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1.
Insert the document.
2.
Press
{
MENU
}
.
3.
Press
{#}
, then
{
2
}{
5
}
.
4.
Press
{+}
or
{-}
to select “ON”.
5.
Press
{
SET
}
.
6.
Enter the fax number.
7.
Press
{
SET
}
.
8.
Enter the transmission start time.
L
Press
{*}
to select “AM” or “PM”.
9.
Press
{
SET
}
.
10.
Press
{
MENU
}
.
L
To cancel after programming, press
{
STOP
}
then
{
SET
}
.
L
Turn on the auto answer setting.
Code #26: Setting the Caller ID list to print
automatically
AUTO CALL. LIST
MODE=ON
[
±
]
ON (default):
The unit will print the Caller ID list
automatically after every 30 new calls (page 49).
OFF:
The unit will not print the Caller ID list, but
keep records of the last 30 caller information.
Code #31: Activating the Distinctive Ring
feature
DISTINCTIVE RING
MODE=OFF
[
±
]
See page 66 for details.
Code #32: Setting the ring pattern for fax
(Distinctive Ring feature)
FAX RING PATTERN
RING=B-D
[
±
]
See page 67 for details.
Code #34: Setting the quick scan
QUICK SCAN
MODE=OFF
[
±
]
This feature is helpful when you want to remove
the document for other uses, because the unit
will release the document before
sending/copying.
L
If the document exceeds the memory
capacity, sending of the whole document or
copying of the exceeded document will be
canceled and this feature will be turned off
automatically.
ON:
The unit will scan the document and store it
into memory first, then the unit will start
sending/copying.
OFF (default):
Deactivates this feature.
See page 87 for the programming method.
Содержание FPG371 - B/W Thermal Transfer
Страница 130: ...130 ...
Страница 131: ...131 ...
