Sending Documents
52
If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.
Manual Number Dialling (Direct Transmission)
To dial the telephone number manually, follow the steps below.
NOTE
1. If you need a special access number to get an outside line, dial it first then press
to
enter a pause (represented by a "-") before dialling the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press
(represented by a"/"). The dialling method will be changed from Pulse to Tone after
dialling the digit "/".
Ex : 9 PAUSE * 5551234
3. To stop the transmission, press
.
The display shows:
COMMUNICATION STOP ?
1:YES 2:NO
Press
to stop the transmission. The Communication Journal will not print out regardless of
the printout mode setting of the Communication Journal.
Direct Transmission
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
MEMORY XMT=ON
1:OFF 2:ON
3
ENTER STATION
00%
4
Enter a telephone number from the keypad.
Ex:
PRESS START TO DIAL
5551234
❚
5
Your machine starts to dial the telephone number.
* DIALLING *
5551234
8
9
1
5
5
5
1
2
3
4
PAUSE
STOP
1