Loading Documents
41
Basic
O
p
era
ti
o
n
s
1. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.
2. Place the document(s)
FACE DOWN
on the Automatic Document Feeder (ADF) until the leading edge
placed into the machine stops.
If you are sending multiple pages, make sure that
the bottom sheet enters first
. You can also stack
up
to 30 PAGES
on the ADF at one time. If you have more than 30 pages, wait until transmission or storing
in memory starts as pages feed through, place any remaining pages on top of the last page in the feeder.
3. Adjust the Document Guides to center the document on the ADF.
When you set a document on the ADF, the display message will change from date and time (standby) to
the following message. You can now change basic transmission settings, or begin the dialling procedure.
ENTER STATION(S)
THEN PRESS START 00%
NOTE
1.
The document limitation to send multiple pages is as follows.
* Please note that although the size and thickness meets the specifications, you might not be
able to set 30 pages with some types of papers.
2 Transmitting documents longer than 356 mm requires user's assistance.
3 When transmitting documents longer than A4, please extend the sub-tray as shown below.
How to Load Documents
Document Size
Document Thickness
Up to 20 pages
Up to 257mm X 364mm
0.06 mm to 0.12 mm
Up to 30 pages* A4 size
0.06 mm to 0.10 mm
CORRECT
INCORRECT
Document Guides
Document Sub Tray
