Panasonic Facsimile UF-590, Руководство по обслуживанию

Страница: 256 / 298

256
8.7. Adjusting the Paper Cassette for the Paper Width
NOTE
1. If yo u f orge t to change th e Reco rdin g Paper Si ze setti ng in Fax Paramet er No. 23
when di ffere nt pap er i s ins talled i n th e cassette , th e unit will Sto p prin tin g after the
1st p age of an Inc oming Fax and dis play a " PAPER SIZE MISMATCH" error.
Then, the Recordi ng Pa per Size settin g autom ati cal ly adjust s to th e prop er si ze and the
unit resu mes pri nti ng the Incoming Fax fro m the 1s t page.
1
1. Release the left Paper Separation Clip
latch.
2. Pull up the Paper Separation Clip to
remove it.
3. Reposition the Paper Separation Clip
into the A (A4) or L (Letter/Legal) slot.
4. Swing the Paper Separation Clip
downward to latch it in place.
2
1. Load the paper into the Paper Cassette.
Slide the paper width guide to the left
until it lightly touches the stack of paper
without bending the paper. The paper
must fit squarely and firmly between the
Paper Width Guide and the right side of
tray. If it does not, the paper may feed
into the printer incorrectly resulting in a
paper jam.
Caution: Make sure that the paper is set
under the metal Paper Separation
Clips and that it does not exceed
the Maximum Paper Capacity
Mark. You can load about 250
sheets (20 lb weight).
2. Replace the Paper Cassette Cover to the
appropriate paper position (LTR, A4 or
LGL).
3. Slide the Paper Cassette into the machine.
3
The Recording Paper Size setting of the Fax
Parameter No. 23 must match the paper
loaded in the cassette. If you change the
Recording Paper Size, please change the
setting accordingly.
Paper Separation Clip
Max. Paper
Capacity Mark
LGL
A4
LTR
Paper
Width Guide
How to Adjust the Paper Cassette for the Paper Width
The factory default Paper Width setting for the Paper Cassette is on Letter/Leagal size for USA and Canada,
A4 size for other destinations. To change the paper width to other size, follow the steps below.