Panasonic Facsimile UF-590, Руководство по обслуживанию

Страница: 172 / 298

172
5.1.6. Service Mode 6 (RAM Initialization)
Initializes the RAM and restores the Function Parameters to their default values.
Note:
This operation should be performed when the unit is first installed.
RAM Initialization Table
Service Mode 6
Step Operation or Unit Condition LCD Display
1 Standby
2 Press “FUNCTION” and then “7”.
3 Press “MONITOR” four times, then press “*”.
4 Press “6”.
5 Press “V” or “/\ “ to select the initialization mode.
(See Table)
6 Press “START”.
7 Return to step 3 and press “STOP” to return to standby.
No. Initialize Mode Description
99 SHIPMENT SET (A) Deletes all setting information, except parameter number
80 and 81, then set default values. (See Note)
98 SHIPMENT SET (B) Deletes all setting information, except parameter number
61, 80 and 81, then set default values. (See Note)
97 FLASH MEMORY CLEAR Deletes all information in the Flash Memory.
16 LBP LOG CLEAR Clears the Printer Error Log.
15 LOGO/ID/PSWD CLR Clears the Logo, ID, Polling Password.
14 ALL JOB CLEAR Clears all Jobs stored in Flash Memory.
13 PROG. DIAL CLEAR Clears the Program keys.
12 AUTO DIAL CLEAR Clears the One-touch, ABBR Numbers and Phone Books.
11 JOURNAL CLEAR Clears the Journal contents.
* PARAMETER INIT. Restores the Fax and Function Parameters to default
values.
MMM-dd-yyyy 15:00
00%
SET MODE (1-6)
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
* RAM INITIALIZE *
ENTER NO. OR
* RAM INITIALIZE *
LOGO/ID/PSWD CLEAR
* COMPLETED *
LOGO/ID/PSWD CLEAR
MMM-dd-yyyy 15:00
00%