Installation
6-1
Section VI Installation
6.1 Installation requirements
The ADF can be affected by ambient conditions.
The following conditions should be carefully checked for normal operation of the
ADF.
1.ADF Should not be installed where the following conditions exist.
(1) Extremely high or low temperature and high humidity.
(2) Areas where temperature and humidity can change rapidly.
(3) In direct sunlight.
(4) Dusty or Dirty areas.
(5) Poor ventilation.
(6) Areas wih chemical gases like ammonia gas.
(7) Areas with excessive vibration.
(8) Directly in air conditioning flow.
2.Installation should be made only after the copier is operating properly. Check points
of the copier.
(1) Lead edge registration.
(2) Side to side registration.
(3) Skew.
