18
Smart power-saving mode.
再次按下此按钮取消。（指示灯熄灭）
Press the button again to cancel. (Indicator lights off)
Econavi
Econavi
(Indicator
lights on)
（指示灯亮起）
(Indicator lights on)
Keeping comfortable humidity
Suitable for dry environment
and rapid humidifying
For slowly humidifying
Due to influence of the surroundings (such as the humidity, temperature or room size),
the set humidity may not be reached completely. (P.30 Q4, P.33)
When the water fill indicator is on, cannot set humidity.
In the “Clean/Humid.” mode, if you set “Econavi” when “Auto Vol.” is not set, you can set
humidity.
Set the humidity.
Humidity setting
湿度设定
Humidity setting (Target)
Approximately 50%
Approximately 60%
Approximately 40%
湿度设定（目标）
约
50%
约
60%
约
40%
(For full auto mode and humidified air purifying mode only [Auto Vol.])
（只适用于全自动模式、加湿空气净化模式下的
[
风量自动
]
模式）
OPERATION
使用方法
（指示灯亮起）
Econavi
是由“侦测模式”与“学习模式”组合而成的省电运转模式，并能自动调节
风量。（第
28~29
页）
（当以“空气净化”或“加湿空气净化”模式运转时，可通过按 按钮进行取消。）
Notice
提示事项
省电智能运转。
Econavi is a smart power-saving operation by combining the “patrol mode”
with “learning mode”, and adjusts the air volume automatically. (P.28~29)
(When “Clean Air.” or “Clean/Humid.” is set, the Econavi can also be canceled
by pressing the button.)
设定湿度。
The indicator will be changed sequentially as below each time the button is
pressed.
每按一下，指示灯将按下图顺序进行切换。
想保持舒适湿度时
适用于环境干燥时、想快速加湿时
想慢慢加湿时
受周围环境影响（湿度
·
温度或房间大小）有可能不能完全达到设定的湿度。（第
30
页
Q4
，
第
33
页）
加水指示灯亮起时，不能进行湿度设定。
加湿空气净化模式下，当“风量自动”未设定时，如果设定
Econavi
，可进行湿度设定。
