Sleep Mode Auto 1
Sleep Mode
Auto 1
Sleep Mode
Auto 2
Sleep Mode Auto 2
No Sleep Mode Auto
No Sleep
Mode Auto
“Sleep Mode Auto Operation” can be adjusted. (The default setting is “Sleep Mode Auto 1” .)
Please release the buttons, when
the sensitivity is set as required.
About sleep mode auto operation
Light off
No change
Light low level
Light low level
Stop operating the product, then press and buttons at the same time for about 3
seconds. The indicator will light on in sequence as illustrated below.
Indoor brightness
Control panel
Clean sign
Indicator
Dimness
Dark
Mode
When the air volume is set to “Hi”, “Med”
or “Lo”, the air volume cannot adjust
automatically.
Detects the indoor brightness by the light sensor, and automatically adjusts the brightness of
indicators and the air volume. When sleeping, the room becomes dark, the indicators will be dimmed
or light off and the air volume becomes low.
Light low level
Light low level
No change
Light low level
No change
No change
No change
No change
Control panel
Clean sign
Control panel
Clean sign
FURTHER INFORMATION
The louver move to the best position according to the air quality to clean the air.
Type of airflow
Air quality
Air is clean
Odor, PM2.5 or smog is
detected
Blue
Switch direction
Switch direction
Red
Upward
Front
House dust is detected
Odor/PM2.5/smog and
house dust are detected
Clean sign
Figure
Action of louver
14
Notice
