使用方法
開始或停止運轉。
OPERATION
Press the button again, the product stops operating.
Turn on or off the product.
Press the button to operate.
The product operates in auto air volume mode when it is used for the first time,
then operates in the last mode when it was stopped.
Power Off/On
運轉關/開
再次按下此按鈕,產品停止運轉。
按下按鈕產品開始運轉。
初次運轉時以自動風量模式運轉,之後以上次停止時的模式運轉。
每按一下,指示燈將按下圖順序進行切換。
風量
根據感應器檢測的空氣污染程度,自動調節風量,
利用最佳的風量淨化空氣。
快速淨化空氣。
以中等速度淨化空氣。
低速安靜地淨化空氣。
(指示燈點亮)
選擇合適的風量淨化空氣。
(Indicator lights on)
Purify air quickly.
Purify air in medium speed.
Purify air quietly in low speed.
Select appropriate air volume for purifying air.
The indicator will be changed sequentially as figure below.
Automatically adjust the air volume according to the
air pollution detected by sensor, and use appropriate
air volume to purify air.
Air volume
11
使
用
方
法
OP
ERATION
運轉關/開按鈕
PM2.5
按鈕/指示燈
Power Off/On
button
PM2.5 button/
indicator
Child lock button/
indicator
Air volume button/
indicator
定時按鈕/指示燈
Timer button/
indicator
兒童安全鎖按鈕/指示燈
風量按鈕/指示燈
智慧節能按鈕/指示燈
Econavi button/
indicator