其
他
信
息
OTHER
INFORMAT
ION
About nanoe
TM
X
FURTHER INFORMATION
Please confirm the following before you put questions forward or send the product for repair.
There is a slight sound when nanoe
TM
X is being generated. Depends on the environment
and operation mode, the sound may be a bit loud or inaudible but it is not abnormal.
Why is a “jee” sound from the emission outlet?
Why does the clean sign remain unchanged?
FAQ
17
Such problems are easy to occur when the sensitivity of the sensor is higher or lower.
You can adjust the sensor with a specified sensitivity. (P.16)
常见问题解答
咨询或送去维修之前,请先确认以下情況。
感应器灵敏度较高或较低时容易出现此现象。可调节感应器灵敏度。(第
16
页)
为什么出风口发出“叽”的声音?
为什么空气污染度指示灯不发生变化?
产生
nanoe
TM
X
时,将发出些许声音。根据使用环境、运转模式不同,声音的大小有所不同,这并非异常。
更多信息
关于
nanoe
TM
X
Super Allergy-buster: inhibits the activity of allergens (pollen, dead mites and feces).
The 2 in 1 HEPA composite and deodorizing filter which with the Bio-sterilization and Super
Allergy-buster can inhibit allergens (pollen, dead mites and feces), bacteria and mold.
The 2 in 1 HEPA composite and deodorizing filter may give off unique and harmless smell of
“Green Tea Catechin”, ”Bio-sterilization” and “Super Allergy-buster”.
About 2 in 1 HEPA composite and deodorizing filter
Testing authority: Osaka Municipal Technical Research Institute
关于二合一
HEPA
多功能脱臭过滤网
二合一
HEPA
多功能脱臭过滤网中集成了生物除菌、抗过敏原,能夠抑制过敏原(花粉、螨虫尸体及粪便)、细菌、霉菌。
抗过敏原:抑制过敏原(花粉、螨虫尸体及粪便)的活动。
检测机构:大阪市立工业研究所
Test method: check the decrease of refined house dust mite allergen, by using enzyme immune
measuring method.
检测方法:通过酶免疫测定法确认精制尘螨过敏原的降低。
Inhibiting method: contact with Super Allergy-buster
去除方法:与抗过敏原接触
Target: allergens trapped by the filter (mites, pollen)
检测对象:过滤网收集的过敏原(螨虫、花粉)
Test result: inhibited 99% and above. (Daikou research report No. 2127)
检测结果:抑制
99%
以上。(大工研报第
2127
号)
二合一
HEPA
多功能脱臭过滤网会散发出“绿茶儿茶素”、“生物除菌”以及“抗过敏原”特有的气味,此气味
对人体无害。
nanoe
TM
X
产生的环境条件。
利用室内空气产生,根据温度和湿度的不同,有时可能无法稳定产生。
室内温度:约
5
℃~
35
℃(露点温度:
2
℃以上)
相对湿度:约
30
%
~
85
%
产生
nanoe
TM
X
的同时,也会产生微量臭氧。但其产生量远远不及自然森林存在的臭氧量,不会对人体造成伤害。
Room temperature: about 5
℃
~
35
℃
(dew-point temperature: 2
℃ or above
)
Conditions for nanoe
TM
X
generation
Relative humidity: about 30%
~
85%
nanoe
TM
X is generated by using the air in the room. Therefore, due to the differences in
temperature and humidity nanoe
TM
X may not be generated stably.
When nanoe
TM
X is generated, small amount of ozone will be released. However, the quantity will
be far less than the level in natural environment such as forest, and not be harmful to human beings.