Lens(top left)
Dry cotton swab
Wipe the dirt off the lens with a dry
cotton swab
Dirt sensor
< about once every 3 months >
Remove the external cover of dirt sensor as
shown below.
Wipe the lens with a dry cotton swab as
shown below.
Wipe the lens periodically.
(The sensor may not function normally with
accumulation of moisture and smoke from
cigarette.)
Wipe off any dust and dirt using
a well wrung-out cloth
Body and front panel
< about once a month >
Do not wipe it with a hard cloth or hardly.
Otherwise, the surface may be damaged.
Wipe the power plug with a dry cloth.
MAINTENANCE
2 in 1 HEPA composite and deodorizing filter
Air outlet
< about once a month >
Remove any dust using a vacuum cleaner, and
wipe off the dirt with a well wrung-out soft cloth
Do not wipe it with a hard cloth or hardly.
Otherwise, the surface may be damaged.
After the cleaning, dry the body naturally
before starting the product.
<about once every 2 weeks>
Remove any dust on the front
(handles side) using a vacuum cleaner
See Page 9~10 for installation
and disassembly instructions
Do not press too hard while
vacuuming. Otherwise, the
filter may be damaged.
No care or maintenance
is needed for the back
(Non-handles side).
Do not wash it with water.
Brush nozzle or
crevice nozzle
Spread a newspaper
or the like to avoid
staining the floor.
Cleaning method
14
Handle
维护保养
清洁方法
出风口 <约每月
1
次>
先用吸尘器等去除灰尘，再用充分拧干的软布
擦拭污渍
请勿使用粗布擦拭或过度用力擦拭，否则会损伤表面。
清洁后，晾干机体再运转产品。
二合一
HEPA
多功能脱臭过滤网 <约
2
周
1
次>
用吸尘器等去除正面(把手侧)的灰尘
吸尘时请勿用力按压，
否则过滤网可能会受损。
背面(非把手侧)无需进行维
护保养。
请勿水洗。
安装及拆卸方法见第
9~10
页。
毛刷吸嘴或缝隙吸嘴
把手
垫上报纸等物品，
以免灰尘弄脏地面。
灰尘感应器 <约
3
个月
1
次>
用干棉棒去除镜片上的污垢
拆下灰尘感应器外壳，如下图。
使用干棉棒进行擦拭，如下图。
镜片（左上方）
干棉棒
定期擦拭镜片。(带有湿气以及被香烟的烟油污染
后，有可能无法进行正常感应。)
请勿将干棉棒插入到镜片以外的其他部位。
请务必在拔出电源插头的状态下进行操作。
看不清楚镜片时可用灯光照射。
You can use a light in order to see lens
clearly.
Be sure to disconnect the power before
cleaning.
Do not insert a cotton swab in other parts.
机体及前面板 <约每月
1
次>
使用充分拧干的软布擦拭污渍
请勿使用粗布擦拭或过度用力擦拭，否则会损伤
表面。
请使用干布擦拭电源插头。
