8
開始或停止運轉
。
觸摸此鍵產品開始運轉
。
初次運轉時以風量自動模式運轉
；
之後以上次停止時的模式運轉
。
再次觸摸此鍵
，
產品停止運轉
。
停止運轉後但仍接通電源時
，
PM2.5
濃度/定時顯示窗仍將顯示當前的
PM2.5
濃度
。
(觸摸鍵亮起
)
(觸摸鍵亮起
)
(觸摸鍵亮起
)
自動
靜音
中速
高速
急速
(根據感應器檢測的空氣污染程度
，
自動調節風量
，
利用最佳
的風量淨化空氣
。
)
(低速安靜地淨化空氣
。
)
(以中等速度淨化空氣
。
)
(以較高的速度淨化空氣
。
)
(以最快的速度淨化空氣
。
)
OPERATION
使用方法
運轉關/開
Notice
提示事項
風量
靜音自動
選擇合適的風量淨化空氣
。
一鍵靜音運轉
。
每觸摸一下
，
風量指示燈將按下圖順序進行切換
。
觸摸此鍵產品靜音運轉
，
並自動控制風量大小
。
(此時風量指示燈熄滅)
再次觸摸此鍵取消此模式
。
指示燈亮起
(button lights
up)
(button lights
up)
(button lights
up)
(indicator lights up)
Press this button again to disable this mode.
Press this button to operate silently and automatically control the air volume.
(The air volume indicator is off at this moment.)
Auto
Silent
(purifies air quietly at low speed.)
Medium speed
(purifies air at medium speed. )
High speed
(purifies air at high speed.)
Turbo (
purifies air at fastest speed.)
(automatically adjust the air volume according to the
air pollution detected by sensor, and use appropriate
air volume to purify air.)
Each press of the button, the air volume indicator switches in the order shown
below.
Turn on or off.
Select appropriate air volume for purifying air.
One-button to operate silently.
Press the button again, the product stops operating.
When operation is stopped with the power connected, The PM2.5 concentration/
timer display window will still show the current PM2.5 concentration.
Press the button to operate.
The product operates in auto air volume mode when it is used for the first time,
then operates in the last mode when it was stopped.
Power off/on
Air volume
Silent Auto
Auto
