- -
Choose to keep the name already programmed into this
group by pressing ENTER or program a new name by
pressing EDIT.
Turn off the control panel.
• If the control panel is on, remove and then reinsert the battery pack.
Engage the switch. Check the Assembly Qualifier’s display.
A name can be given to the tool that is being learned.
The name can be up to eight characters long. Pressing
the button next to the desired character set will toggle
the characters. Continue to press the button until the
desired character is displayed. The Add Char button
can be used to add the new character to the name. The
Del Char button will remove the last character from the
name.
The learn process should take place at this point. The display on the AQ wireless will
provide feedback on the progress of the learn function.
Battery tools has been learned to another unit and that unit is within radio range, the
other unit should be turned off while the new learn is taking place.
Once the learning process is complete, pressing any key will return the unit to the
programming menu.
