- 16 -
Creating a New Password:
The AQ Wireless has a default password of 0 1 0 4.
This password can be altered to any four digit number.
To alter the password, select CHANGE PASSWORD
from the menu.
The keypad screen will appear and in the center of the
screen, the prompt will read “ENTER NEWPASSWORD”.
At this point the user can use the keypad to enter a four
digit number that will be stored and used as the new
password.
Once the new password is entered, the ENTER key may be pressed in order to save
this value to non-volatile memory.
The ESCAPE key may be pressed at any time to exit this routine without saving any
changes to the password.
AutoCal:
The AutoCal function can be used on battery tools to
write a default group (parameter) for the associated
tool.
Pressing the Enter key sets the group as the default
group.
Pressing the Escape key will allow the user to exit this
function without performing an AutoCal.
