- 7 -
Selecting Mode
Select mode Intended use Work material
Impact driver
Fastening
Bolt
Nut
Driving
Wood screw
Metal screw
Self-driving
screw
Drill driver
mode with
clutch func-
tion
Drilling
Wood
Metal
WARNING!
This tool must not be used as a drill in
“Impact Driver mode”. During drilling in
steel, the drill bit may break in case of
blocking and this may cause dangerous
cut wounds.
Impact Driver Operation
Select Impact Driver with the impact/
drill driver switch.
• Switch to the impact/drill driver posi-
tion only when the tool has completely
stopped rotating. Damage may be
caused if the tool is rotating.
The impact driver ( mark) display will turn
silver.
Drill Driver Operation
Select Drill Driver with the impact/drill
driver switch.
• Switch to the impact/drill driver posi-
tion only when the tool has completely
stopped rotating. Damage may be
caused if the tool is rotating.
The drill driver ( mark) display will turn silver.
Clutch Torque Setting
Adjust the torque to one of the 1
clutch settings or “ ” position.
CAUTION
:
Test the setting before actual opera-
tion.
Set the scale at this mark ( ).
How to Use the Belt Hook
WARNING!
• Be sure to attach the belt hook
securely to the main unit with the
screw firmly fastened. When the belt
hook is not firmly attached to the main
unit, the hook may disconnect and the
main unit may fall.
This may result in an accident or
injury.
• Periodically check screw for tightness.
If found to be loose, tighten firmly.
• Be sure to attach the belt hook firmly
and securely onto a waist belt or other
belt. Pay attention that the unit does not
slip off the belt. This may result in an
accident or injury.
• When the main unit is held by the
belt hook, avoid jumping or running
with it. Doing so may cause the hook
to slip and the main unit may fall.
This may result in an accident or
injury.
• When the belt hook is not used, be
sure to return it to the storing posi-
tion. The belt hook may catch on
something.
This may result in an accident or
injury.
• When the unit is hooked onto the
waist belt by the belt hook, do not
attach driver bits to the unit. A sharp
edge object, such as a drill bit, may
cause injury or an accident.
EY7542(EU).indb 7
2007/07/27 13:59:10
