Panasonic ET-YFB100G Скачать руководство пользователя

Страница: 8 / 55

Read this first!

8 - ENGLISH

CAUTION:

POWER

When disconnecting the power cord, be sure to hold the power plug and power connector.

If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric

shocks will result.

When not using the device for an extended period of time, disconnect the power plug from the wall

outlet.

Failure to do so may result in fire or electric shock.

Disconnect the power plug from the wall outlet before carrying out any cleaning of the device.

Failure to do so may result in electric shock.

ON USE/INSTALLATION

Do not place heavy objects on top of the device.

Failure to observe this will cause the device to become unbalanced and fall, which could result in damage or

injury. The device will be damaged or deformed.

Do not put your weight on this device.

You could fall or the device could break, and injury will result.

Be especially careful not to let young children stand or sit on the device.

Do not install this device in a place which is not strong enough to take its full weight or on top of a

surface which is sloped or unstable.

Failure to observe this will cause the device to fall down or tip over the device, and severe injury or damage

could result.

If installing the device to the underside of a table, be careful to choose a location where it will not be

susceptible to impact from legs, etc.

Mount screws being loosened may cause the device to fall down, which will lead to damage to or deformation

of the device.

Securely tighten the screws.

Do not place the device in extremely hot locations.

Doing so will cause the outer casing or internal components to deteriorate, or result in fire.

Take particular care in locations exposed to direct sunlight or near stoves.

Always disconnect all cables before moving the device.

Moving the device with cables still attached can damage the cables, which will cause fire or electric shocks to

occur.

ACCESSORIES

Do not subject the AC adaptor to strong impact.

The adaptor being dropped, or suffering any other strong impact may cause a short circuit, fire or electric

shock.

Ask an Authorized Service Center to carry out repairs to the AC adaptor.

Содержание ET-YFB100G
























































Результаты поиска

Содержание ET-YFB100G

Отзывы:

Похожие инструкции для ET-YFB100G

Бренды по названию

Популярные бренды

Panasonic ET-YFB100G, Руководство по эксплуатации

Результаты поиска

Содержание ET-YFB100G

Отзывы:

Похожие инструкции для ET-YFB100G

Бренды по названию

Популярные бренды