Panasonic ET-YFB100G Скачать руководство пользователя

Страница: 21 / 55

Connections

ENGLISH - 21

Connecting to the DIGITAL LINK compatible device

▶

■

Connections

DIGITAL LINK

compatible projector

The twisted-pair-cable

receiver of other manufacturer

Names of the DIGITAL LINK

terminals may be different for

each manufacturer.

Not DIGITAL LINK

compatible projector

HDMI cable

(commercially available)

When connecting to the DIGITAL LINK

compatible projector

When connecting to the projector that is not

DIGITAL LINK compatible

Attention

When connecting to the projector using the twisted-pair-cable receiver of other manufacturer, do not use

another twisted-pair-cable transmitter between the twisted-pair-cable receiver of other manufacturer and the

projector.

The images and sounds may be interrupted or become unstable.

Do not use the switching hub between the interface box and DIGITAL LINK compatible projector, and between

the interface box and twisted-pair-cable receiver.

Request the specialized technician or your dealer for wiring work of the cable for DIGITAL LINK. If the work is

not properly conducted, the cable transmission characteristics do not meet, and the images and sounds may

be interrupted or become unstable.

Use the cable that conforms with the following conditions.

•

Compatible to the CAT5e or a higher standard

• Shield type (including the connector)

•

Straight wire connection

•

Single wire

When installing the cable, confirm that the cable specification satisfies the characteristics of CAT5e or higher

by using a cable tester or a cable analyzer.

When a relay connector is used in the middle, measure in a condition that the relay-connector is included.

The interface box becomes easier to get affected by the internal noise, as well as the external noise. Therefore,

install and use the cable without being wound as much as possible.

Do not pull the cable with a strong force. In addition, do not bend or fold forcedly.

Do not bind with other cables, especially the power cable. Keep the distance from other parallely set cables as

far as possible.

When connecting the interface box to the DIGITAL LINK compatible projector, open the DIGITAL LINK status

menu of the projector after connecting the cable. Confirm that the signal quality is -12 dB or lower.

Содержание ET-YFB100G
























































Результаты поиска

Содержание ET-YFB100G

Отзывы:

Похожие инструкции для ET-YFB100G

Бренды по названию

Популярные бренды

Panasonic ET-YFB100G, Руководство по эксплуатации

Результаты поиска

Содержание ET-YFB100G

Отзывы:

Похожие инструкции для ET-YFB100G

Бренды по названию

Популярные бренды