Panasonic ET-PKR100P, Руководство по установке

Страница: 14 / 22

14 -
ENGLISH
Installing the bracket to the projector
Attach the projector mount bracket to the projector (sold separately).
*PT-RZ470 is used as an example in the illustrations throughout this manual.
Projector mount bracket
Arrow
Secure in four places
1) Place the projector upside-down onto a piece of
soft material.
2) Secure the projector mount bracket to the bottom
of the projector using the four supplied captive
washer screws (M4 × 10) as illustrated on the left.
Suspending the projector
Angle adjusting bracket
Thread
1) Screw the supplied two captive washer hex head
bolts (M6 × 16) half way into the screw holes at the
top of the angle adjusting bracket.
Attention
z
Check that the thread ridges of the temporarily
fastened captive washer hex head bolts are
correctly and firmly affixed to the thread of the
angle adjusting bracket.
Installation (continued)