Panasonic ET-PKR100P, Руководство по установке

Страница: 11 / 22

ENGLISH
- 11
Installing the attachment plate to the ceiling
After checking the height, width, and structure of the installation location while referring to “Standard installation
dimensions” on pages 6 to 8, determine the appropriate positions for setting up the screen and installing
the projector.
■ Attachment plate mounting hole sizes and preparation
Make mounting holes while referring to the attachment plate diagram.
To the screen
Center of
screen
Attachment plate diagram Bolt mounting hole size
<Units: mm (")>
Four holes drilled to fit ceiling
mount bolts (M10)
Install the attachment
plate with the circular
hole corner facing the
screen.
200 (7-7/8")
344 (13-17/32"
)
200 (7-7/8")
200 (7-7/8")
200 (7-7/8")
300 (11-13/16")
72 (2-27/32"
)
50
(1-31/32")
100 (3-15/16"
)
Attention
z
If attaching to a concrete ceiling, the sizes of the holes for the anchoring nuts or curled plugs should match the
sizes specified by the manufacturer.
z
Use commercially available M10 ceiling mount bolts, hex nuts, flat washers, spring washers, and anchoring
nuts or curled plugs.
Installation (continued)