4 - ENGLISH
Product components
This is a ceiling mount bracket for installing projectors.
■
Applicable ceiling mount brackets and projectors
z
Ceiling mount brackets
ET-PKD120H (for high ceilings) / ET-PKD120S (for low ceilings)
z
Projectors
PT-EZ770 / PT-EZ590 / PT-EZ580 / PT-EZ57 / PT-EW730 / PT-EW650 / PT-EW640 / PT-EW550 /
PT-EW540 / PT-EX800 / PT-EX620 / PT-EX610 / PT-EX520 / PT-EX510 / PT-FZ570 / PT-FW530 / PT-FX500
Note
z
In this document, the alphabet letters at the end of the projector part numbers are omitted.
z
Models other than the above may also be supported. Refer to the operating instructions of the projector you are using.
■
Structural components
Parts name
Form (number of parts)
Applications
Projector mount
bracket
This is used to install the projector
itself.
It has a function which allows ad-
justment of the left and right tilt.
Bolts
Captive washer
hex head bolts
(M6×16)
× 4
These are used to secure the
brackets to the projector.
Projector drop-
prevention kit
Captive washer
Screw (M6×20)
× 1
Wire rope
[2.0 mm (3/32
"
)
wire diameter,
800 mm (31-1/2
''
)]
× 1
Flat washer (M8)
× 2
Prevents the projector from falling.
z
Tightening torque for the screws are M6: 4 ± 0.5 N•m.
z
When tightening up the screws, use a tool such as a torque screwdriver or torque wrench. Do not use electric
screwdrivers or impact screwdrivers.
Attention
z
Dispose of the packaging materials properly after taking the product out of it.
z
Store small parts in an appropriate manner, and keep them away from small children.
× 1
