8
English
Cleaning the shaver
• Each time you press [select], the course changes from “Clean/
Dry/Charge”
“Clean/Dry”
“Dry/Charge”
“Dry”
“Charge”.
• The courses start approximately 6 seconds after they are
selected.
• The course will be aborted if the power is cut off or the
detergent cartridge is detached during cleaning. In this case,
perform the course again from the beginning.
• Do not detach the detergent cartridge or the water tank as the
cleaning liquid may spill causing a malfunction.
Insert the appliance
plug.
Plug in the adaptor.
Pull up the arm.
Remove the protective
cap and then attach
the shaver.
• Turn the shaver off before
attaching.
• Check that the outer foil is not
deformed or damaged when you
are attaching the shaver.
Push down the arm.
Press [select] to select the course.
Course
Course selection indications
Course completion summary
On recharger
Changeable course
halfway through
On recharger
On shaver
Time required
(guide)
clean
dry
charge
clean
dry
charge
charge
Charge
*
1 hour
Clean/Dry/Charge
4 h 30 min
Clean/Dry
3 hours
Dry/Charge
4 h 20 min
Dry
2 h 50 min
*The lamp goes out in 6 seconds.
• Remove any soap or water
on the shaver if it has been
washed with hand soap or
any other detergent.
ES7056.indb 8
2006/06/30 11:10:28
