Panasonic ES-ST37, Руководство по эксплуатации

Страница: 14 / 92

14
English
Replacingthesystemouterfoilandtheinnerblades
system outer foil once every year
inner blades once every two years
► Removingtheouterfoilsection
Press the foil frame release buttons and lift the
outer foil section upwards.
►
Attachingtheouterfoilsection
After turning the water inlet surface to the front,
securely attach the outer foil section to the shaver
until it clicks.
►
Replacingthesystemouterfoil
1. Press the system outer foil release buttons
and pull down the system outer foil.
2. Align the water inlet surface and the system
outer foil mark ( ) and securely attach
together.
•
The system outer foil cannot be reversely
attached.
•
Always insert the system outer foil to the
foil frame when attaching to the shaver.
1 1
2
►
Replacingtheinnerblades
1. Remove the inner blades one at a time.
• Do not touch the edges (metal parts) of the
inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they
click.
1 2
►
Replacementparts
Replacement parts are available at your dealer or Service Center.
Replacement parts for
ES‑ST37
System outer foil WES9087
Inner blades WES9068
Troubleshooting
Problem Action
Shavings fly all over.
This can be improved by cleaning
every time after shaving. If shavings
are stuck on the inner blades, clean
them with the cleaning brush.
Confirm that the cleaning shutter
is firmly closed.
System outer foil gets hot.
Apply oil.
(See page 13.)
Replace the system outer foil if it
is damaged or deformed.
(See this page.)
The shaver cannot be
properly cleaned even
after water is poured from
the water inlet.
When the shaver is very dirty, first
use the cleaning brush to remove
beard trimmings.
Or, remove the foil frame and
wash with water.
(See page 13.)
The blades do not dry.
The blades may not dry quickly
due to temperature conditions.
The blades can be dried more
easily by removing for drying.