Panasonic ES-ST37, Руководство по эксплуатации

Страница: 13 / 92

13
English
Lubrication
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each of the
outer foils.
3. Raise the trimmer and apply a drop
of oil.
4. Switch the shaver on, and run it for
approximately five seconds.
3 2
5. Switch off the shaver, and wipe off any excess oil from the outer
foils with a soft cloth.
Cleaningwiththebrush
►
Cleaningwiththelongbrush
Clean the system outer foil (
a
),
the shaver body (
b
) and the
trimmer (
c
) using the long
brush.
  
►
Cleaningwiththeshortbrush
Clean the inner blades using the short brush by
moving it in direction (A).
•
Do not move the short brush in direction (B) as it
will damage the inner blades and affect their
sharpness.
•
Do not use the short brush to clean the outer
foils.
(B)
(A)
▼ ▼
To remove light dirt To remove heavy dirt
4. Slide the cleaning shutter
until it clicks.
5. Clean the outer foil section
with running water.
6. Turn the shaver off.
•
Rinse with water and
shake up and down several
times to remove the water.
4. Turn the shaver off after
10 – 20 seconds.
5. Remove the outer foil section
and turn the shaver on.
6. Clean the shaver and the
outer foil section with
running water.
•
Rinse with water and
shake up and down several
times to remove the water.
•
Be careful not to hit the main body on the sink or any other object
while draining the water. Failure to do so may cause malfunction.
▼ ▼
7. Wipe off any drops of water with a dry cloth.
8. Dry the outer foil section and the
shaver completely in a shaded area.
•
The outer foil section will dry faster if
removed from the main body.
9. Attach the outer foil section to the
shaver.
10. Lubricate the shaver. (See this page.)