46
English
Troubleshooting
►
Self‑cleaning recharger
Problem
Action
The blade has not
been thoroughly
washed.
If the shaver is not cleaned
for more than 2 weeks, first
clean with the cleaning
brush to remove beard
trimmings. (See page 43.)
Do not add detergent and
water except when replacing
the cleaning liquid.
Doing so may deteriorate
the cleaning function.
(See page 41.)
After cleaning, oil‑like
droplets may remain on the
outside of the foil frame.
This is the lubricating
component of the cleaning
liquid and does not indicate
a problem. You may wipe it
off with a soft cloth.
The CHECK lamp
glows.
See page 50.
Problem
Action
The mode does not
start.
Check that the AC adaptor
is connected to the self‑
cleaning recharger, and that
the recharger is plugged in
to a household outlet.
(See page 36.)
Confirm that the shaver is
properly attached to the
self‑cleaning recharger.
(See page 36.)
The Clean or Dry operation
may not function under
extreme low temperatures
(approx. 0 °C or lower).
Check if the CHECK lamp
glows. (See page 50.)
Cleaning liquid has
accumulated in the
cleaning tray.
Remove any waste, etc. that
has accumulated in the
drain at the bottom of the
cleaning tray.
(See page 45.)
If you use the self‑cleaning
recharger when the shaver is
wet or when soap or shaving
gel is on the shaver, cleaning
liquid may accumulate in the
cleaning tray.
ES-LV74_CH.indb 46
2014/03/26 14:22:10
