45
English
Cleaning the self‑cleaning recharger
Beard trimmings may become attached to the cleaning
tray of the self‑cleaning recharger. Follow the steps
below to remove them. We recommend doing this each
time you change the cleaning liquid.
1. Be sure to remove the cleaning
liquid unit and the appliance plug
from the self‑cleaning recharger.
•
Be careful not to spill the cleaning
liquid.
•
Some cleaning liquid components
and skin oil may separate and
adhere to the cleaning liquid unit
and cleaning liquid filter. This does
not indicate a problem.
2. Pour water as illustrated
while tilting the cleaning
liquid unit and shaking it
gently.
•
You can clean with the
cleaning liquid filter
removed.
•
After washing, be sure
to attach the cleaning
liquid filter.
3. Gently wipe off any beard trimmings
attached to the inside of the cleaning
tray with a cloth or tissue paper
dampened with water.
•
Clean the corners and uneven
parts of the cleaning tray with a
cotton swab dampened with water.
►
When the water does not drain from the
cleaning tray
Beard trimmings may clog the drain at
the bottom of the cleaning tray.
In this case, you cannot clean or dry the
shaver.
Push the beard trimmings down through
the drain with a toothpick etc.
ES-LV74_CH.indb 45
2014/03/26 14:22:10
