1
English
Replacementparts
Replacement parts are available at your dealer or Service Center.
Replacement parts for
ES‑LT71
System outer foil and inner
blades
WES9013
System outer foil
WES9087
Inner blades
WES9068
Detergent cartridge
WES035
Cleaningtheself‑cleaningrecharger
Beard trimmings may become attached to the cleaning tray of the
self‑cleaning recharger. Follow the steps below to remove them.
We recommend doing this each time you change the detergent
cartridge.
1. Be sure to remove the water tank and the
appliance plug from the self‑cleaning
recharger.
Be careful not to spill the cleaning liquid.
•
1
. Gently wipe off any beard trimmings
attached to the inside of the cleaning tray
with a cloth or tissue paper dampened
with water.
Clean the corners and uneven parts of
the cleaning tray with a cotton swab
dampened with water.
•
2
Do not pull hard on the rubber blade protector (
a
) at the bottom
of the cleaning tray. The rubber may come off if you pull hard on
it. It is only necessary to pull it up slightly.
Warning
DonotwashorapplywatertotheACadaptororself‑
cleaningrecharger.Failuretoobservethismaycause
electricshockorresultinshortcircuits.
Whenthewaterdoesnotdrainfromthecleaningtray
Beard trimmings may clog the drain at the bottom
of the cleaning tray.
In this case, you cannot clean or dry the shaver.
Push the beard trimmings down through the drain
with a toothpick etc.
Removingthebuilt‑inrechargeablebattery
ATTENTION:
A lithium ion battery that is recyclable powers the product you
have purchased. Please call 1‑800‑8‑BATTERY for information
on how to recycle this battery.
Remove the built‑in rechargeable battery before disposing of the
shaver. Do not dismantle or replace the battery so that you can
use the shaver again. This could cause fire or an electric shock.
Please contact an authorised service center.
