37
English
Lubrication
To maintain shaving comfort for a long time, it is
recommended that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each
of the system outer foil.
3. Raise the trimmer and apply
a drop of oil.
4. Switch the shaver on, and run it
for approximately five seconds.
5. Switch off the shaver, and wipe off any excess oil
from the system outer foil with a soft cloth.
Cleaning with the brush
►
Cleaning with the long brush
Clean the system outer
foil (
a
), the shaver body
(
b
) and the trimmer (
c
)
using the long brush.
►
Cleaning with the short brush
Clean the inner blades using the short
brush by moving it in direction (A).
•
Do not move the short brush in direction
(B) as it will damage the inner blades
and affect their sharpness.
•
Do not use the short brush to clean the
system outer foil.
(A)
(B)
Replacing the system outer foil and the
inner blades
system outer foil once every year
inner blades
once every two years
►
Removing the outer foil section
Press the foil frame release buttons and lift
the outer foil section upwards.
►
Attaching the outer foil section
After turning the foil frame mark (
) to
the front, securely attach the outer foil
section to the shaver until it clicks.
►
Replacing the system outer foil
1. Press the system outer foil release
buttons and pull down the system
outer foil.
2. Align the foil frame mark (
) and
the system outer foil mark ( ) and
securely attach together until it clicks.
•
The system outer foil cannot be reversely attached.
•
Always insert the system outer foil to the foil frame
when attaching to the shaver.
•
Do not press the system outer foil release buttons with
excessive force.
Doing so may bend the system outer foil, preventing
complete attachment to the foil frame.
ES-LT6A_2A_CH.indb 37
2016/01/27 15:42:31
