33
English
Using the shaver
1
1
Press the power switch.
•
The power cannot be turned on when the switch
lock lamp ( ) blinks, as the power switch is locked.
Press the power switch for more than 2 seconds to
unlock. (See page 30.)
2
2
Hold the shaver as illustrated.
3
3
Shave by slowly gliding the shaver over your
face against the grain of the beard.
•
Start shaving by applying gentle pressure to your
face. Stretch your skin with your free hand and
move the shaver back and forth in the direction of
your beard. You may gently increase the amount
of pressure as your skin becomes accustomed to
this shaver. Applying excessive pressure does not
provide a closer shave.
►
Notes
•
If you press the power switch for more than 2 seconds,
the sonic vibration cleaning mode is activated.
(See page 36.)
You cannot shave in this mode.
•
Do not place your fingers on the power switch while
using the shaver. This may cause the shaver to lock
the power switch or turn off. Place your fingers on the
finger rest while using the shaver.
•
The appliance may not operate in an ambient
temperature approximately 5 °C or lower.
•
Depending on the beard thickness or the amount of
beard trimmings in the shaver head, the shaving
sensor may not react and the driving sound may not
change. This is not abnormal.
•
The shaving sensor may not respond when the
remaining battery capacity is low. If this happens,
recharge the shaver.
•
Avoid the following situations to prevent damaging the
system outer foil. Applying pressure to any part of the
system outer foil or bringing the system outer foil into
contact with hard object may cause damage on the
system outer foil.
-
Shaving with only a part of the system outer foil.
-
Finger or nail coming into contact with the system
outer foil.
►
Cord shaving
If you insert the appliance plug to the shaver and plug
in the adaptor into a household outlet, you can use it
even if the battery capacity is low.
•
If the shaver does not work, continue charging it for
approx. 1 minute.
•
The battery will be discharged even when using the
shaver with the AC adaptor.
ES-LT6A_2A_CH.indb 33
2016/01/27 15:42:30
