19
English
1
1
Attach the brush head.
•
Push down firmly until you hear a “click”.
2
2
Wet the sonic scrub brush.
3
3
Apply shower gel to your skin.
4
4
Select the mode by pressing the power switch
[
K
e
].
5
5
Put the sonic scrub brush onto your skin and
begin exfoliation.
•
We recommend using on legs,
arms (especially elbows and
knees) and neckline.
Do not use on sensitive areas
of skin, face or throat.
•
Do not continue to hold in one place. Slide over
skin in a circular pattern.
•
Apply to the same area of skin for approximately
30 seconds each time, check your skin and
adjust usage accordingly.
6
6
Press the power switch to turn off the power.
•
Moisturise by applying a moisturiser that suits
your skin on the area where the sonic scrub brush
was used.
Cleaning
•
Always clean the heads and caps after use to keep
them in a hygienic state.
•
Switch off and unplug the appliance before cleaning.
•
Take care not to damage the skin protector, the frame,
the caps for legs/arms and for underarms/bikini‑line
during cleaning.
Dry cleaning [
A B C D E F
]
Epilation head/Shaver head
1. Lift the caps and
the frame upward
while holding the
edge of the cap
[
A B C
] or remove
the frame by
pushing the frame
release button
[
F
9
].
2. Clean the caps
[
A B C
], the
epilation head [
D
]
and the shaver head
[
F
] with the
cleaning brush [
M
].
PB018266 - ES-EL9A-S520 �������_(01EN)_08-16-19.indd 19
2019/8/16 10:45:23
