Panasonic ER-GK75, Руководство по эксплуатации

Страница: 14 / 36

14
English
3. Wipe off the water with a towel
and let it dry naturally.
• It will dry faster with the blade
removed.
4. Apply the oil to the blade after
drying. (See page 15.)
5. Attach the blade and the skinguard attachment to
the main body.
• Be sure to place the skinguard attachment on the
main body to protect blade when storing.
► With the brush
1. Remove the attachment and blade.
(See pages 12 and 15.)
2. Clean the main body using the brush.
3. Clean the blade using the
brush.
• Keep pressing down the
cleaning lever (
c
) to raise
the moving blade (
d
) when
cleaning between the
stationary blade (
e
) and the
moving blade.
c
e
d
4. Apply the oil to the blade. (See page 15.)
5. Attach the blade and the skinguard attachment to
the main body.
• Be sure to place the skinguard attachment on the
main body to protect blade when storing.
► With water
To remove light dirt To remove heavy dirt
1. Remove the
attachment and turn
the main body on.
(See page 12.)
2. Run water down the
water inlet at the back
of the main body, rinse
thoroughly for
approximately 20
seconds, and then turn
the main body off.
1. Remove the
attachment and blade.
(See pages 12 and 15.)
2. Clean the main body,
the blade and the
attachment with
running water.
• Shake up and down several times to remove the
water.
• Be careful not to hit the main body on the sink or
any other object while draining the water. Failure
to do so may cause malfunction.
PB017538 - ER-GK75������_(01GB)_04-04-19.indd 14 2019/4/4 15:09:12