Panasonic ER-GB37, Руководство по эксплуатации

Страница: 16 / 324

16
English
Troubleshooting
Perform the following actions.
If the problems still cannot be solved, contact the
store where you purchased the unit or a service
centre authorized by Panasonic for repair.
Problem Action
The main body
has become
blunt.
The operating
time is short.
The main body
stopped working.
Until problems are solved, please
follow each procedure as follows:
1. Charge the main body.
(See page 10.)
2. Clean the blade and apply oil.
(See pages 14 and 15.)
3. Replace the blade.
(See page 15.)
4. Have the battery replaced by
an authorized service centre.
Charge the battery for
approximately 18 hours
continuously to rejuvenate it.
If few uses remain even after
charging, the battery has reached
the end of its life. (Fluid may be
leaking due to degradation at the
end of battery life.)
Contact an authorized service
centre for repair.
Problem Action
The main body
cannot be
charged.
Push the main body into the
charging plug all the way and
make sure the charge indicator
lamp glows.
Charge within the recommended
charging temperature of 0 °C to
35 °C.
The main body
makes a loud
sound.
Apply oil.
(See page 15.)
Confirm that the blade is properly
attached.
Blade life
Blade life varies according to the frequency and period
of use of the main body.
For example, the blade life is approximately 3 years
when using the main body for 5 minutes 8 times a
month. Replace the blades if cutting efficiency reduces
substantially despite proper maintenance.
PB017461 - ER-GB37������_(01GB)_05-07-19.indd 16 2019/5/10 15:40:55