Question
Answer
During operation
(continued)
Reclining
The angle of the backrest, legrest
or armrest automatically changes
at times .
The angle automatically changes in the following cases .
⁃
While scanning the shoulder roller position
The unit body moves automatically, and gets inclined to the
angle that makes scanning easy.
●
The movement is not made when the unit body is inclined deeply.
Reclines
around 20°
Raises
around 60°
⁃
When
is pressed to end the massage.
The chair automatically returns to the upright position.
●
Only the legrest returns to the original position if the massage is
completed according to the timer.
●
If
is pressed to end the massage, all operations immediately
stop and the angle does not automatically change.
The backrest is not restored to
upright position after massaging .
Only the legrest is retracted when the motion comes to stop by
timer operation .
Press
twice to restore the backrest to the upright position .
After use
Hand & arm
Red marks are left on the under
side of my hands/arms after a
hand & arm massage .
Marks may remain on the hands and arms after use .
These eventually fade and are not a problem .
How to adjust the <Position>
Scanning of shoulder roller position*
The correct shoulder position
cannot be found during scanning
of shoulder roller position .
(The shoulder position slips each
time .)
Correct scanning of shoulder roller position may not be possible
for some sitting positions (such as leaning forward) .
Adjustwiththeshoulderposition"▲"and"▼"button.(EN20toEN21)
For more correct scanning, sit firmly in the unit and lean back gently so
that your head is touching the pillow (backrest).
▶
Continued on the next page
Q&A
EN41
