manualshive.com logo in svg

Panasonic ElitePANABOARD UB-T880, Руководство по эксплуатации

Поделиться
Скачать
Panasonic ElitePANABOARD UB-T880 Скачать руководство пользователя страница 10

For Your Safety

10

Operating Instructions

Electronic Pen / elite Panaboard

Power

Installation and Relocation

Make sure that the battery is installed with 
the correct polarity as indicated on the 
battery holder. Incorrectly installed 
batteries may burst or leak, resulting in 
injuries.

Batteries that seem worn down or 
damaged should not be used. Using worn 
down or damaged batteries may result in 
leaking.

Do not charge, short, heat, break or throw 
in a fire, as it may result in the battery 
leaking, generating heat, or bursting.

When disposing of the battery, cover the 
battery contacts with insulation (ex. tape). 
Direct contact with other batteries may 
result in leaking, fire, or explosion.

Do not solder the battery, as it may result 
in the battery leaking, generating heat, or 
bursting.

Do not use near medical equipment.
(Do not bring into a surgery room, 
intensive care unit, critical care unit, etc.) 
Electromagnetic waves generated by this 
device can affect equipment, and can 
cause equipment to malfunction.

Do not use near automatic doors, smoke 
detectors and other automatically 
controlled equipment.
Electromagnetic waves generated by this 
device can affect equipment, and can 
cause equipment to malfunction.

Use at least 22 cm (9 in.) away from 
pacemakers.
Electromagnetic waves generated by this 
device can affect the operation of 
pacemakers.

When the unit is not used over an 
extended period of time, switch it off and 
unplug it. If an unused unit is left 
connected to a power source for a long 
period, degraded insulation may cause 
electric shock, current leakage, or fire.

The unit should be used only with the 
power cord enclosed with the unit.

Do not position the unit in a location 
where it is unstable.

Do not place the unit in a hot humid or 
dusty environment. Prolonged exposure 
to these adverse conditions may cause 
fire or electric shock.

To prevent fire or shock hazard, do not 
expose this unit to rain or any type of 
moisture.

When moving the unit, be sure to unplug 
the power cord from the AC outlet. If the 
unit is moved with the power cord 
attached, it can cause damage to the cord 
which could result in fire or electric shock.

Move this unit with two persons. 
Otherwise, this unit may fall down and 
cause injury.

CAUTION

UB-T880-PJQXC0337YA_mst.book  10 ページ  ２０１０年５月３１日　月曜日　午後４時３０分

Содержание ElitePANABOARD UB-T880

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды