Panasonic EH-NE12, Руководство пользователя

Страница: 16 / 24

English
16
Installing or removing the nozzle
To install
·
Assemble the nozzle and the air
outlet of the main body. When a
“click” sound is heard, this means
that the nozzle has been fixed. As
shown in the picture, the nozzle
should be installed as the air outlet
is vertical.
To remove
·
Unscrew the quick-dry nozzle
downward from the air outlet of the
main body and then take down the
nozzle.
How to use the hair dryer
1
Before using the hair dryer,
confirm that the main switch is
at position “0”, then plug into a
household outlet and turn on the
main switch.
·
If you want to dry your hair
quickly, set the quick-dry nozzle
in the direction as shown in the
illustration.
▲
Notes
This hair dryer is equipped with an automatic over-
heating protective device. If the hair dryer overheats,
it will switch to cool air mode. Switch off the hair dryer
and unplug it from the household outlet. Allow it to cool
down for a few minutes before using it again. Check
that no fluff, hair etc. is in the air inlets and outlets
before switching it on again.
Parts identification
C
B
A
G
E
H
D
F
I
A
Air outlet
B
Quick-dry nozzle
C
Ion outlet
D
Air inlet
E
Handle
F
Ring for hanging
G
Main switch
3
：
Hot air
2
：
Healthy air
＊
1
：
Cool air
0
：
Off
H Plug
I
Cord
＊
Note: It is measured without the nozzle according to
the standard requirements of GB/T23106.