4
4 Disassembly and Assembly Instructions
4.1.
Disassembly Instructions
1. Insert a small flat head screwdriver into the groove of the
Shaft Cover as shown in Figure 4.
(Figure 4)
2. Remove the Shaft screw and take off the Shaft from Main
body as shown in Figure 5.
(Figure 5)
3. Remove the spring by pull out the Housing side and
Press plate side as shown in Figure 6.
(Figure 6)
4. Using a screwdriver remove the two tapping screw from
Press plare cover as shown in Figure 7.
* Be careful not to lose the spring *.
(Figure 7)
5. Take off the Press plate cover as shown in Figure 8.
(Figure 8)
Содержание EH-HW19
Страница 3: ...3 3 Troubleshooting Guide Refer to SCHEMATIC DIAGRAM ...
Страница 7: ...7 5 Wiring Connection Diagram Figure 17 ...
Страница 8: ...8 6 Schematic Diagram Figure 18 ...
