Panasonic EBL128, Руководство пользователя

Страница: 21 / 42

Panasonic Eco Solutions Nordic AB
MEW01624 Rev: - EBL128 version 2.0.x, Daily user's manual
19
5.10 Disable / re-enable outputs for routing
equipment (B10)
Not available for users with access level / type "Information only".
Disabled outputs for routing equipment are listed in menu H4/U1.
Outputs for routing equipment (fire brigade tx / fault tx) can be
disabled and re-enabled via this menu (B10). Disabled output will
stay disabled, until re-enabled again via this menu.
Can be useful during an installation and test period, when only local
alarms are required.
Disabled output for routing equipment is also indicated by LED
"
Fault / Disablements Fire brigade tx" (L15).

Log in with a User name and Password for typ Building officer (or
Service personnel), see page 5.
H1 Perform monthly test
Scroll (or press
"2"
) to menu H2.
H2 Disable or re-enable

Press
"A"
to sub menu B1.
B1 Disable zone

Scroll (or press
"0"
) to menu B10.
B10 Disable / re-enable outputs for routing equipment

Press "A" .
The actual status for the output FIRE and FAULT respectively will be
shown. Use the keypad to select:
1=enabled
or
0=disabled
for the output respectively.
Step right / left with the arrow keys.

Press "A" . The new status for the output FIRE and FAULT
respectively will be shown.

Press
"A"
and "Return" (P9) to menu B10.

Scroll to another menu or press
"Return"
to menu H2. Scroll to
another menu or leave the menu system by pressing
"Return"
.