Tuning and Editing Channels
41
Set all channels automatically [Auto Tuning]
Automatically retune all channels received in the area.
1
Start Auto Tuning
2
Settings are made automatically
Example: Digital TV
Example: Digital TV
Digital TV Auto Tuning
All digital TV tuning data will be erased
CH 6
69
TV Fin land
Boxer Navigator
SVT HD
9
9
9
32
32
32
Searching
Digital TV Auto Tuning
Scan
This will take about 3 minutes.
RF Ch
Channel Name
Type
Quality
Digital TV: 4
Digital TV
Digital TV
Digital TV
●
All the previous tuning settings are erased.
●
When the operation is completed, the channel at the lowest position will be displayed.
●
Search begins in the order from the lower channels to the higher channels.
●
If tuning has not been done completely
[Manual Tuning]
(see below)
Set Digital TV channel manually [Manual Tuning]
Normally use [Auto Tuning] or [Update Channel List] to retune Digital TV channels.
If tuning has not been done completely or for adjusting the direction of the aerial or dish, use this function.
●
All channels found will be added to the Channel List.
474.00
[CH21]
MHz
0
0
10
10
Digital TV Manual Tuning
Physical Channel
Signal Quality
Signal Strength
No.
Channel Name
Type
New
Digital TV: 0
select physical channel
select offset
start tuning
Set Analogue TV channel manually [Manual Tuning]
Set Analogue TV channel manually after Auto Tuning.
●
If a VCR is connected only with the RF cable, select channel position [0].
CH 57
0
0
75
Analogue TV Manual Tuning
Manual Tuning
Store
1
Select the channel position
2
Select the channel
3
Search
4
Select [Store]
select
store
m
s
