Panasonic DW17K2U Скачать руководство пользователя страница 123

Страница: 123 / 223

Chapter 4

Settings — [DISPLAY OPTION] menu

ENGLISH - 123

2) Press the <ENTER> button.

The

[SHUTTER SETTING]

screen is displayed.

3) Press

to select [FADE-IN] or [FADE-OUT].

4) Press

to switch the item.

Item

Adjustment

[FADE-IN]

[FADE-OUT]

[OFF]

Does not set fade-in or fade-out.

[0.5s] - [10.0s]

Sets the fade-in or fade-out time.

Select an item from [0.5s] to [4.0s], [5.0s], [7.0s], and [10.0s].

Items from [0.5s] to [4.0s] can be selected in increments of 0.5.

Note

Press the <SHUTTER> button on the remote control or the control panel during fade-in or fade-out to cancel the fade operation.

Setting [STARTUP]

1) Press

to select [SHUTTER SETTING].

2) Press the <ENTER> button.

The

[SHUTTER SETTING]

screen is displayed.

3) Press

to select [STARTUP].

4) Press

to switch the item.

[OPEN]

Starts projection with the shutter function disabled (shutter: open) when the power is turned on.

[CLOSE]

Starts projection with the shutter function enabled (shutter: closed) when the power is turned on.

Setting [SHUT-OFF]

1) Press

to select [SHUTTER SETTING].

2) Press the <ENTER> button.

The

[SHUTTER SETTING]

screen is displayed.

3) Press

to select [SHUT-OFF].

4) Press

to switch the item.

[LAST USED]

When the projector is switched off, the projector turns into standby with the shutter status left as is.

[OPEN]

When the projector is switched off, the projector turns into standby with the shutter left opened.

[CLOSE]

When the projector is switched off, the projector turns into standby with the shutter left closed.

[FREEZE]

Pause the projected image temporarily regardless of the playback of the external device.

1) Press

to select [FREEZE].

2) Press the <ENTER> button.

Press the <MENU> button to release.

Note

[FREEZE] is displayed on the screen when video is paused.

[WAVEFORM MONITOR]

Use the input signals from a connected external device to display in a waveform. Check whether video output

(luminance) signal level is within the recommended range for the projector and adjust.

1) Press

to select [WAVEFORM MONITOR].

2) Press

to switch the item.

Содержание DW17K2U
































































































































































































































Результаты поиска

Содержание DW17K2U

Отзывы:

Похожие инструкции для DW17K2U

Бренды по названию

Популярные бренды

Panasonic DW17K2U, Руководство по эксплуатации

Результаты поиска

Содержание DW17K2U

Отзывы:

Похожие инструкции для DW17K2U

Бренды по названию

Популярные бренды