Panasonic DVCPRO AJ-BS901EN, Руководство по эксплуатации

Страница: 6 / 26

6
Features
The unit has the following features.
≥
It enables high picture quality transmission by means of non-compressed wide-band 360 Mbps serial component signals.
≥
It uses a tri-axial cable.
≥
It enables a DVCPRO camera recorder to be operated as a system camera.
≥
It enables the transmission of the signals of two audio channels.
≥
It enables RET 1CH and PROMPT 1CH transmission.
≥
It has a compact size equivalent to one-half of a rack unit.
≥
It can also be operated using DC power.
≥
It can perform the VTR operations of the camera recorder.
Bear in mind the following checkpoints when connecting the camera recorder to the unit’s system.
1
When using this unit with a system to which a camera recorder is connected, an AJ-SDX900 model must be used for this unit
to function.
Depending on the version of the software being used with the camera recorder, it may be necessary to update it, in which
case you should consult your dealer.
2 The triax and ECU (extension control unit) cannot be used at the same time for the camera recorder.
3 When the triax is connected, some of the settings (such as GAIN, CAM-BAR SW, WHITE BAL, SHUTTER and USER SW)
selected by the switches on the camera recorder will not take effect.
4 When the triax is connected, the composite video signals (MON OUT, VIDEO OUT) of the camera recorder will be non-
standard signals.
Checkpoints for system connections